How to Fix a Skateboard that Turns by Itself

There’s nothing more frustrating than trying to skateboard and having your board start turning on its own. This can make it hard to control and can be very dangerous. Luckily, you can do a few things to fix this problem. This blog post will teach you how to fix a skateboard that turns by itself. Keep reading for more information!

It’s important to fix a skateboard that turns by itself because it can be dangerous and make it difficult to control the board. If your board depends on its own, follow the steps below to fix the problem.

How to Fix a Skateboard that Turns by Itself

Required Materials

If your skateboard is turning on its own, you can do a few things to fix the problem. This blog post will teach you how to fix a skateboard that turns by itself.

It’s important to fix a skateboard that turns by itself because it can be dangerous and make it difficult to control the board. If your board turns on its own, follow the steps below to fix the problem. The required materials are:

  • skateboard
  • screwdriver
  • wrench
  • pliers

How to Fix a Skateboard that Turns by Itself Step by Step Guide

Step 1: Bushing Replacement

If the skateboard is turning on its own, one of the main things you need to check is how your bushings are tight. The easiest way to do this is by removing the four bolts that hold each truck to the board and looking at how tight the bushings are. If they’re loose, you’ll need to tighten them up.

Use a Wrench to Tighten the Nut

To do this, use a wrench to tighten the nut located on the inside of the truck. Please make sure not to tighten them too much, or they won’t turn! If you need replacement bushings, there are many places online where you can purchase some new ones.

Step 2: Trucks Adjustments

Another reason your skateboard may be turning on its own is how tight your trucks are. If they’re too loose, this can contribute to the board starting to turn on its own as you ride it. To fix this, use a wrench to tighten the bolt located on the top of the truck. This will allow for more stability and control when turning. If they’re too tight, you’ll need to loosen the bolt and adjust how loose they are until the board starts to work properly.

Step 3: Replace the Trucks

Another potential issue that could be causing your board to start turning on its own is how the trucks are put together. This can happen if you start riding or putting weight on the deck, but it’s also entirely possible to have this problem occur even if you’ve never done anything like this before. The best way to fix this problem is by completely replacing the trucks. While this might cause a little bit of a hassle, it’s better to replace them than risk hurting yourself due to how they’re put together.

Step 4: Wheel Replacement

If your board turns on its own at high speeds or you’ve been doing everything listed above, but with no luck fixing the problem, it may be time to replace the wheels. This is a lot easier than it sounds and can be done by following these steps:

  • First, you’ll need to remove the bearings from the wheel using a screwdriver
  • Once all of these parts are removed, place your new wheel parts in their respective places within your skateboard and use pliers to tighten the nut on each side
  • After this, tighten how loose they are by using the screwdriver to adjust how much you need until it works how you want it to. Then, you can search online for new wheels if needed.
Remove the Bearings From Wheel

Step 5: Clean or Change Bearings

If none of the above methods work, it’s time to clean or change your bearings. If you’ve been riding around with these for a while and they’re gunked up, it might be time to get rid of them and put in new ones. This is extremely simple to do and can be done by following these steps: – First, remove how loose or tight your wheels are by using the screwdriver – After this, use the wrench to tighten how much you need until they work how you want them to

  • Now that your bearings are working how you want them to, reinstall everything and follow these steps reverse. You can search online for new bearings if needed.
  • Make sure how loose or tight your bushings are. There should be no extra play in how they work, but you don’t want them so tight that the board doesn’t turn how it’s supposed to.

Step 6: Get New Baseplates

Another potential problem with how your board turns is how the baseplates are attached. This can happen if you’ve dropped or hit your board against something, and it needs to be fixed as soon as possible. The easiest way to do this is by completely replacing how they’re installed on the deck itself. To do this, follow these steps:

  • First, you’ll need to use a screwdriver and wrench to see how tight or loose your wheelbase is
  • Once this is done, remove how loose or how tight your bushings are by using the same two tools
  • Now that how loose or how tight they are has been dealt with, simply attach the new baseplates and follow these steps in reverse to how you took them off.

Step 7: Properly install all Bolt, Screws, and Nuts

Another potential reason how your board turns is how some of the bolts, screws, or nuts are installed on it. This can happen if you’ve taken apart how they work in the past, so you need to fix this right away before riding around with how loose or how tight these parts are. To do this, simply follow these steps:

Properly install all Bolt, Screws, and Nuts
  • First, you’ll need to know how loose or how tight the screws, bolts, and nuts are by using a screwdriver and wrench
  • After this is done with each part in question, tighten how they work how you want them to until they’re working how you’d like them to.

Step 8: Loose/Missing Hardware

Quite possibly, the simplest reason why how your board turns is how loose or how missing some of the hardware on it is. This can happen if you’ve had this problem before, and it’s extremely easy to fix. You’ll need first to determine how loose or how tight each of these parts is by using a screwdriver and wrench. Once how loose or tight they are has been determined, tighten how much you need until each part works how you want it.

After following these steps, your board should be back to normal and working how it’s supposed to. If this doesn’t work after trying all of these options, then the bearings might be how loose or how tight, in which case you’ll need to replace how they work. Please keep reading for more information about how to fix a skateboard that turns by itself.

What Tools Do I Need to Fix My Skateboard that Turns by Itself?

A skateboard that turns by itself can be a real nuisance. It can make it difficult to control the board and cause you to lose balance. Luckily, you can do a few things to fix the issue.

The first step is to identify what is causing the problem. A few things could be causing your skateboard to turn left or right. One possibility is that the bearings in your skateboard are not functioning properly. If this is the case, you will need to replace them. Another possibility is something wrong with your trucks, such as loose screws or bearings. Again, if this is the case, you will need to tighten the screws or replace the bearings.

Need to Fix My Skateboard

Tools you will need to fix your skateboard:

  • skateboard tool kit
  • screwdriver
  • wrench
  • hammer

Frequently Asked Question

Is There Any Other Solution Besides Fixing My Skateboard that Turns by Itself?

There may be times when you cannot fix your skateboard, and it will need to be taken to a professional. If this is the case, take it to a skateboard shop and have them look at it. They should be able to identify the problem and fix it for you.

Where Can I Buy the Parts Needed to Fix My Skateboard that Turns by Itself?

If you need to replace the bearings in your skateboard, you can buy them online or at a skateboard shop. Likewise, if you need to replace the screws or bearings in your trucks, you can buy them at a hardware store.

What Is the Best Way to Fix a Skateboard that Turns by Itself?

There are a few things you can do to fix the issue. The first step is to identify what is causing the problem. A few things could be causing your skateboard to turn left or right. One possibility is that the bearings in your skateboard are not functioning properly. If this is the case, you will need to replace them. Another possibility is something wrong with your trucks, such as loose screws or bearings. Again, if this is the case, you will need to tighten the screws or replace the bearings.

Conclusion

If your skateboard starts turning by itself, you can fix the problem by tightening or loosening the trucks. You may also need to adjust the bolts on the wheels. By following these simple steps, you should be able to stop your skateboard from turning by itself and get back to shredding some gnarly street spots. Thanks for reading our post about how to fix a skateboard that turns by itself.

You may also read: How to Make Longboard Wheels Spin Longer

Leave a Comment