A skateboard is a great way to get around town, but it can be tricky to keep it steady when you’re going fast. One of the most common problems people have is keeping their trucks straight. Skating with a crooked skateboard truck is never any fun. In this blog post, we will show you how to fix crooked trucks on a skateboard using just a few simple tools. So, whether you’re a beginner or an experienced skater, read on for the fix!
Fixing crooked skateboard trucks is easier than you might think and only requires a few essential tools. This blog post will show you how to do it yourself – no need to pay for professional help! So, whether your skateboard trucks are just a little bit off or completely crooked, follow these simple steps and get skating like new again!
Why Crooked Trucks on A Skateboard?
There are a few reasons why your skateboard trucks might be crooked. One of the most common reasons is that the screws that hold the truck together have come loose. This can be easily fixed by tightening them up with a screwdriver.
Another reason your trucks might be crooked is if they’re not correctly aligned with the skateboard’s deck. This can be corrected by adjusting the bolts on the truck.
If you’ve tried both of these fixes and your trucks are still crooked, it might be time to replace them. Trucks can wear out over time, so it’s important to keep an eye on them and replace them.
Required Materials
- Screwdriver
- Adjustable Wrench
- Replacement Trucks (if needed)
A Step by Step Guide on How to Fix Crooked Trucks on A Skateboard
Step 1: Remove the Trucks From Your Skateboard
There are a few ways to remove trucks from your skateboard. The most common way is to use a screwdriver to remove the screws that hold the truck together. You can also use an adjustable wrench to loosen the bolts on the truck. First, remove the nuts that hold your truck onto your board. Then, remove the two screws inside of them with a screwdriver and take off the hanger, which is the long metal part connected to your wheels.
Step 2: Skateboard Truck Bushings
Skateboard truck bushings are important because they help to keep your trucks stable while you’re skating. However, over time, they can wear out and become loose. This can cause your trucks to become crooked. You’ll need to replace the bushings on both your skateboard deck and your trucks to fix this. You can buy new bushings online or at your local skate shop.
You’ll need to buy new bushings for the trucks and your deck. For this how to fix crooked trucks on a skateboard tutorial we purchased:
- Bag o’ Bushings (for both the boards and trucks)
- 1 sheet of sandpaper (coarse and fine grits)
- Silicone spray
Step 3: Sand Your Board & Trucks
Use your coarse sandpaper for sanding the top of your skateboard deck gently. Do not press hard, as this may damage your board! Next, spray a thin layer of silicone on both the inside and outside of the baseplate, then add one bushing at a time. Now add another coat or two of silicone on top of each bushing. This will help your bushings seat perfectly after you tighten them to the board.
The other thing you’ll need to know is how to adjust the bolts on your skateboard trucks. This will help to get them properly aligned with your deck. You can find more information on how to do this in our how to adjust skateboard trucks blog post.
Step 4: Skateboard Truck Kingpins
Skateboard truck kingpins are important because they help to keep your trucks stable while you’re skating. However, over time, they can wear out and become loose. This can cause your trucks to become crooked. You’ll need to replace the kingpins on both your skateboard deck and your trucks to fix this. You can buy new kingpins online or at your local skate shop.
Use a skate tool to tighten the nut on top of the truck’s kingpin, which holds your bushings in. It should be pretty tight to make sure your bushings won’t move around later.
Step 5: Skateboard Truck Axles
After cleaning the axles with a rag, place them into their respective holes and tighten them using a skate tool. Your truck will now feel much more sturdy.
Step 6: Skateboard Deck & Trucks
First, reattach your board’s baseplate to its deck by placing the screws back in. Then put on your wheels and tighten them down. For this tutorial, we used:
– 100mm/85A Loaded Caguar Longboard Wheels (47mm)
Step 7: Skateboard Truck Pivot Cups
Before putting the truck’s pivot cup back on, use a rag to clean it and get any dust off. Then, to attach it, place the cup against the board and give it a few good whacks with your hand or a hammer to ensure it’s secure.
Step 8: Adjust the Nuts & Tighten Your Trucks
Finally, tighten the nuts underneath your trucks using a skate tool, making sure not to tighten too much not to damage your board. Don’t forget to use a rag to clean any excess dirt off of them before tightening! For this tutorial, we used:
- Longboard Skate Tool
- Heavy Duty Skate Tool
- Zip Tie (optional)
And there you have it! A how to fix crooked trucks on a skateboard tutorial with step-by-step instructions so you can fix your board in no time. These instructions will get you back on the road in no time, from the bushing setup to tightening down your trucks!
You Can Check It Out to Loose Should Skateboard Wheels Be
Step 9: Reassemble Your Skateboard Truck
Put your kingpin back into the truck, drop it down to connect with your bushings, and tighten the nut on top of the truck.
Now put the other side on and tighten! You now have a how to fix crooked trucks on a skateboard tutorial completed by fixing your own board. Thanks for using FixYourBoard! And if you want to learn how to get off a skateboard safely, check out how from our how to ollie tutorial.
You Can Check It Out to Remove Skate Stoppers
How to Fix a Warped Skateboard
Step 1: Tools & Materials
To fix a warped skateboard, you’ll need the following tools and materials:
- Skate tool
- Screwdriver
- Hammer
- Rag
- Bushings (optional)
- Kingpins (optional)
- Pivot Cups (optional)
Step 2: Determine Where the Warp Starts
To determine where the warp starts, you’ll need to inspect your skateboard closely. Look for any bowed or curved boards, and measure the distance between the two ends. This will help you to identify how bad the warp is and how much work you’ll need to do to fix it.
Step 3: Warm Affected Areas
Warped skateboards can often be fixed by warming up the affected areas. This can be done by using a heat gun, hairdryer, or even a stove. Be very careful when heating up your skateboard, as too much heat can damage the wood and make the problem worse.
Step 4: Remove Hardware
Once the areas have been warmed up, remove all of the hardware from your skateboard. This includes the screws, bolts, and nuts that hold your deck together.
Step 5: Counter the Warp With Heat & Weight:
The next step is to counter the warp with weight and heat. Place some heavy-duty boards on either side of the area while preparing to release the bow with a blow dryer, stove, or other heated surfaces. Let this weight and localized heat recover boards for about 30 minutes before repeating on another section, board by board, until the entire board is straightened out.
You Can Check It Out to Powerslide on A Longboard
Frequently Asked Question
How Do You Fix Crooked Trucks on A Skateboard?
You can do a few things to fix crooked trucks on a skateboard. One is to loosen the screws that hold the truck in place and then adjust it until it is straight. Another option is to use a tool called a “truing stand” to adjust the truck.
What Is the Best Way to Fix Crooked Trucks on A Skateboard?
There are a few ways to fix crooked trucks on a skateboard. The most common way is to loosen the screws that hold the truck in place and then adjust it until it is straight. Another option is to use a tool called a “truing stand” to adjust the truck.
Why Should I Not Use Duct Tape to Fix My Truck if It Is Already Crooked?
The use of duct tape to fix a crooked truck can result in the tape coming loose and falling off. This can cause the skateboard to become unstable and could lead to an accident.
Is There Any Other Way to Fix Crooked Trucks on A Skateboard Besides Using Glue?
There may be other ways to fix crooked trucks on a skateboard, but using glue is the most common way to do it. The glue will help keep the truck in place and will make the skateboard more stable.
Conclusion
If you are having problems with your trucks and your skateboard is starting to go a bit crooked, do not fear! All you need is a screwdriver and about five minutes of time. In this article, we have outlined the simple steps that you need to take in order to fix your trucks and make sure that your skateboard rides straight again. So what are you waiting for? Grab that screwdriver and get started! Thanks for reading our post about how to fix crooked trucks on a skateboard.
You may also read: How to Put Stickers on Skateboard
