How to Fix Snowboard Chips

Snowboards can often suffer from chips and dings due to regular use on the slopes. These chips can affect the performance and durability of your snowboard, and it’s essential to address them promptly to prevent further damage.

Fortunately, fixing snowboard chips is a relatively straightforward process that can be done at home with the right tools and techniques. In this article, we will explore some tips and steps on how to fix snowboard chips effectively, so you can keep enjoying your snowboarding adventures with a board that’s in great shape.

Can You Use Sandpaper on Snowboard?

Yes, you can use sandpaper to repair a snowboard chip. Sanding down the edges and filling in any gouges or chips with an epoxy resin filler is one of the most effective methods for fixing damage on your board.

When sanding down the damaged area, make sure to be very careful and work slowly to avoid making more damage. Once you’ve sanded the area down to smooth out any remaining jagged edges, wipe away any dust and debris from the board before applying an epoxy filler to repair the chip.

Make sure to spread out an even coat of the filler over the damaged area, and then allow it to dry fully before using your board again. This method is the most reliable way to repair a chip on your snowboard, but if you don’t feel comfortable or confident in doing it yourself, then make sure to take it to a professional for repairs.

By using sandpaper and an epoxy filler, you can patch up any chips or gouges on your snowboard and get back to shredding the slopes in no time.  So, keep sandpaper handy for any minor repairs you may need. With a little bit of patience and effort, you can fix up your board and enjoy it for many years to come!

10 Methods How to Fix Snowboard Chips

1. Clean the Chip:

Start by thoroughly cleaning the chip and the surrounding area of your snowboard. Use a snowboard-specific cleaner or rubbing alcohol to remove any dirt, wax, or debris that may be present. This will ensure proper adhesion of the repair material.

If your snowboard is a few seasons old, it may be beneficial to use a wire brush to remove any hard-to-remove debris. While cleaning, take a look at the edges of your board. If they appear to be rounded or worn down, it may be beneficial to sharpen them before proceeding with the repair.

Use a Wire Brush

2. Dry the Area:

Allow the cleaned chip and surrounding area to dry completely before proceeding with the repair. Moisture can affect the bonding of the repair material, so make sure the area is completely dry. This can be done by using a clean cloth and applying pressure or using a blow dryer to speed the process. Once the area has dried, you can move on to the next step.

While waiting for the area to dry, you can start preparing the necessary materials and tools. Too much moisture can cause the repair to fail, so be sure it is as dry as possible. However, do not use a heat gun or open flame to dry the area as this can damage the board.

3. Fill the Chip:

Choose an appropriate repair material, such as epoxy or P-Tex, to fill the chip. Apply the repair material evenly, slightly overfilling the chip, and smooth the surface with a plastic scraper or the edge of a credit card. Allow the repair material to cure completely before proceeding. If you used P-Tex, use a utility knife or razor blade to make sure it is flush with the board’s surface.

You may have to repeat this process a few times for optimal results. To prevent any further damage, protect the chip with a paste wax. While wax won’t do much to strengthen the base, it will help keep any future chips from becoming bigger. Now that your board is fixed and looking as good as new, you can hit the slopes again!

4. Remove Excess Material:

Once the repair material has cured, use a snowboard scraper or a razor blade to carefully remove any excess material and level the repaired area with the rest of the snowboard surface. Be sure to take your time with this step, as uneven surfaces can cause dangerous snowboard performance issues.

Use a Snowboard Scraper

While the repair material is still flexible, use a sharp tool to create an edge that matches the original shape of the snowboard. Once the excess material has been removed and the shape is restored, use sandpaper to smooth any rough edges. Finally, wax the repaired area with a layer of wax that matches the rest of the snowboard.

5. Sand the Area:

Use fine-grit sandpaper to gently sand the repaired area until it is smooth and flush with the rest of the snowboard surface. Be careful not to sand too aggressively, as it may damage the surrounding areas. Allow the snowboard to dry completely before proceeding to the next step.

If you are using a liquid epoxy, allow ample time for the epoxy to dry thoroughly before sanding. To ensure a smooth, even finish, use an orbital sander if possible. Make sure you are wearing a face mask to protect yourself from the dust particles that will be released into the air.

6. Buff the Area:

Use a snowboard-specific polishing cloth or a soft cloth to buff the repaired area to a smooth and shiny finish. This will help blend the repair into the rest of the snowboard and improve its appearance. If you need more protection for the repaired area, you can apply a coating of wax or a sealer to the surface. These will also help protect the snowboard from further damage.

With a little bit of patience and care, you can make your snowboard look new again. Then you can get back to shredding the slopes! To ensure your snowboard remains durable and looks good for years to come, be sure to wax it regularly and store it somewhere safe. With the proper maintenance and care, your snowboard will be in top shape for years to come.

7. Apply Wax:

After repairing and buffing the area, apply a coat of snowboard wax to protect the repaired area and enhance the performance of your snowboard. Follow the manufacturer’s instructions for waxing your snowboard. Allow the wax to cool and harden before using your board. This will ensure that the repair is firmly in place.

Apply a Coat of Snowboard

8. Repeat for Multiple Chips:

If you have multiple chips on your snowboard, repeat the same process for each chip, taking care to clean, dry, fill, level, sand, and buff each one individually. Doing this will ensure that all chips are properly repaired and that you get the best results. You may need to apply multiple coats of filler to some or all of the chips.

Keep in mind that it’s better to apply multiple thin coats rather than one thick coat, as this will ensure a more even finish. Applying too much filler can leave lumps or a rough surface, so it’s important to be careful.

9. Check for Durability:

Once the repairs are completed, check the durability of the repaired area by pressing on it with your fingers or tapping it lightly with a tool. If it feels solid and there are no visible cracks, it’s likely a successful repair. If the area is still soft or has visible cracks, you will need to repeat the repair process.

It's Likely a Successful Repair

When checking for durability, it’s important to remember that the area may still need more time to fully cure before it can be used safely. Allow your repair to dry for 24 hours after completing the repair before attempting to use it on the slopes. If the area still feels soft when you press on it, repeat the process again and allow another 24 hours for curing.

10. Regular Maintenance:

To prevent future chips, make sure to regularly inspect your snowboard for any signs of damage and address them promptly. Keep your snowboard well-maintained by storing it properly, avoiding rough surfaces, and following proper riding techniques to minimize impacts.

In conclusion, fixing snowboard chips is an important skill for any snowboarder to ensure the performance and longevity of their snowboard. By following these methods, you can effectively repair chips and dings on your snowboard and get it back to its optimal condition for your next ride.


In conclusion, fixing snowboard chips is a crucial maintenance task that every snowboarder should know how to do. By following the proper steps and using the right tools and techniques, you can easily repair small chips and dings on your snowboard to keep it in optimal condition.Remember to clean and dry the affected area, fill the chip with appropriate repair materials, and smooth and blend the repaired area to achieve a seamless finish. If you have any other questions about how to fix snowboard chips, or if you want to learn more about fixing snowboard chips, be sure to check out our other blog posts. Thanks for reading!