Nothing is more frustrating than getting a rock caught in your jet ski. As you are riding, the small but mighty engine pulls the unsuspecting rock into the moving parts and quickly results in a grinding, tearing sound. This is annoying, but it can also be dangerous if the rock damages critical engine components. Fortunately, there are several ways to get those rocks out and get back to enjoying your ride. This blog post will show you how to get rocks out of jet ski quickly and easily. Read on for tips!
Why Get Rocks on Jet Ski?
There are a few reasons you would want to get the rocks out of your jet ski. The first and most obvious reason is that it can damage the engine if left in there. A less apparent reason is that getting a rock stuck in your jet ski can cause it to lose power and slow down. This can be dangerous if you are riding at high speeds. Finally, getting the rocks out of your jet ski is frustrating and annoying. It’s a hassle you don’t need when trying to enjoy a ride on your jet ski.
How to Get Rocks Out of Jet Ski Step by Step Guide
Step 1: Find the Rock At first
You might think that how to get rocks out of jet ski is as simple as taking them out with your fingers. This would make sense since water is supposed to be able to flow through holes easily. But, unfortunately, there is more than just one rock stuck in your jet ski’s impeller housing in some unfortunate cases. If this is the case, you will have to take a few extra steps.
Step 2: Shut Off Jet Ski and Remove Intake Cap
The first thing you want to do when you try to get rocks out of a jet ski is removed your intake cap so that water can flow freely from the impeller housing. If there are multiple rocks in the impeller housing that could potentially damage your impeller as it spins, you may want to remove the jet ski’s spark plug and the intake cap. This will prevent any slight chance of an accidental start-up causing damage to your impeller.
Step 3: Remove Jet Ski Batteries
Before you begin the cleaning and flushing process, remove your jet ski’s batteries and place them in a safe location. This way, your battery acid won’t run dry during the cleaning process and cause damage to those parts of your jet ski that require electricity. Also, if submerged in water, they will not leak or explode as there is no power connected.
Step 4: Wash the Jet Ski
Take your jet ski to a nearby lake or river, and rinse off all dirt and grime with fresh water. Do not use any household cleaners as these can harm vital components of the jet ski. Remember, we’re talking about an inflatable boat here, so it’s not like how you’d care for a car.
Step 5: Remove the Jet Ski’s Cover
If your jet ski has one, remove its cover. Now clean it using mild soap and water to ensure no dirt remains on it. After rinsing off the soap, dry the surface with a towel or soft cloth before placing back on the jet ski.
Step 6: Drain and Flush Out Jet Ski Tanks and Lines
Turn off your water supply valves, detach any nearby water hoses, and drain all of your jet ski’s tanks and lines using a garden hose. The best place to do this is at a nearby river or lake, so other boats don’t crash into your parked jet ski. It’s also a good idea to remove the drain plugs from each tank before draining them, preventing dirt or sand from getting inside.
Step 7: Remove Jet Ski Decals and Lettering
Using a paint scraper and a little bit of muscle, slowly remove all decals and lettering from the exterior of your jet ski. This is how you will return it to its original factory condition, with no hint that there might be damage underneath.
Step 8: Scrub and Clean All Jet Ski Parts
Using a soft brush and some mild soap, clean off all jet ski parts and components until they shine like new. Pay close attention to areas such as seams and corners where dirt likes to accumulate. Also, use a toothbrush for hard-to-reach crevices such as under the seat or between seat cushions.
Step 9: Dry All Jet Ski Parts
Using a towel, dry off all jet ski parts and components until no moisture remains on them. If you leave moisture on the jet ski, it could lead to mold or mildew forming. This is how you can prevent these destructive fungi from growing into bigger problems in your future.
Step 10: Reassemble the Jet Ski
Now reassemble your jet ski with its decals and lettering back in place, all of its components working as intended, and it’s exterior looking shiny and new. If you feel confident enough to reassemble the jet ski yourself, then go ahead and do so. However, if you’re not comfortable with the task or don’t have the time, then you can always hire a professional to do it for you. Just make sure you get a quote from them before committing so that you know how much the job will cost.
There are a few other things you should know when trying to get rocks out of a jet ski. First, if there are multiple rocks in the impeller housing, it’s best to remove the jet ski’s spark plug along with the intake cap to prevent any accidental start-ups from causing further damage.
Second, make sure you remove your jet ski’s batteries and place them in a safe location while you’re cleaning and flushing out the jet ski. This will prevent the battery acid from running dry and causing further damage. Finally, use a garden hose to flush out all of the jet ski’s tanks and lines before reassembling it.
If you want to know more about how to get rocks out of jet ski, keep reading.
How To Remove Debris From Jet Ski Pump
1. Don’t Put It In Reverse
Never put your jet ski in reverse when the pump is running. This will damage the impellers if the debris is large enough to jam it or suck it into the impeller.
2. Check For Small Objects
Check how much water is being pushed out of the jet skis pump before running it on your lawn, garden, or driveway. Be sure to take everything out of the jet ski that doesn’t need to be there, such as how much weight you can afford to lose so your jet ski is easier to maneuver.
3. Never Pump Out The Drain
Never ever pump water out of the drain at the bottom of a jet ski when it’s running. This will damage the impellers if the debris is large enough to jam it or suck it into the impeller.
4. Use A Filter
Use a filter near where your jet ski connects to the water source, such as how much weight you can afford to lose, so your jet ski is easier to maneuver.
5. Avoid Revving The Engine
Avoid revving the jet ski up if you are trying to dislodge something stuck in the pump. Instead, turn off your water supply valves, detach any nearby water hoses, and drain all of your jet ski’s tanks and lines using how much weight you can afford to lose, so your jet ski is easier to maneuver. Keep reading for more information about getting rocks out of the jet ski.
Frequently Asked Question
How Can I Clean My Fishing Line Without Using Chemicals?
There are a few ways to clean your fishing line without using chemicals.
One way is to use a knife to scrape the line clean. Another way is to use sandpaper to remove the build-up on the line. The third way is to use a metal brush to clean the line.
Why Does It Take so Long to Cast a Fly Rod in Deep Water?
One of the reasons it takes longer to cast a fly rod in deep water is because you have to use more force to get the fly rod to penetrate the water. You also need to make sure your casting motion is smooth and consistent when casting in deep water.
What Is the Best Way to Get Rocks out Of a Jet Ski?
There are a few ways to get rocks out of a jet ski.
One way is to use a knife to scrape the rocks out. Another way is to use sandpaper to remove the rocks from the jet ski. The third way is to use a metal brush to remove the rocks from the jet ski.
Which One Is Better: Wading or Standing in Water for Fishing?
There are pros and cons to both wading and standing in water when fishing.
When wading, you have access to more areas and can move around more easily. However, you are also more susceptible to getting wet. When standing in water, you are less likely to get wet, but you are also limited in your movement.
What Are the Benefits of Wearing Waders when Fishing for Fish and Game?
Some of the benefits of wearing waders when fishing for fish and game include being able to stay dry, being able to move around easily, and being able to access more areas.
How Can I Remove Stones from My Boots?
There are a few ways to remove stones from your boots.
One way is to use a knife to scrape the stones out. Another way is to use sandpaper to remove the stones from your boots. The third way is to use a metal brush to remove the stones from your shoes.
Conclusion
So, there you have it! Follow these tips, and you’ll be able to get those pesky rocks out of your jet ski in no time. If you’re still having trouble or if the stones are too big for these methods to work, don’t hesitate to call a professional. Jet skiing is supposed to be fun, so make sure those rocks aren’t getting in the way of that! Thanks for reading our post about how to get rocks out of jet ski.
You may also read: How to Fix Low Compression on Jet Ski
