How to Make a Jet Ski Faster

Making a jet ski faster is not as difficult as one might think. There are many things you can do to improve the speed and performance of your craft. In this article, we will discuss some tips on how to make a jet ski faster. With a little effort, you can dramatically improve your craft’s speed and performance.

There are a lot of things to worry about when you own a jet ski. How fast it goes is probably not one of them. But if you’re looking for a little extra speed, there are some simple things you can do. In this post, we’ll go over four ways to make your jet ski faster. By following these tips, you’ll be zipping around the water in no time!

How Can I Get More Power Out of My Jet Ski?

If you want to get more power out of your jet ski, there are a few steps that you can take.

One option is to upgrade the engine. This will require the most money and labor, but if done properly, it can provide your craft with much greater performance. Be sure to consult a professional for advice on which upgrades are best for your specific machine.

Another option is to modify the intake and exhaust systems on your jet ski. Many manufacturers offer aftermarket products such as air filters, high-flow exhausts, or water injection kits that can help provide additional power output without needing an expensive engine overhaul.

Finally, consider adjusting the ride height and rake angle of your jet ski in order to improve its performance. If your craft is sitting too low in the water, it can cause drag, reducing overall power output. Similarly, if the rake angle on your jet ski is too steep, it can also limit its top speed.

By following these steps, you should be able to get more power out of your jet ski without needing a complete overhaul of the engine itself. Of course, as with any modification or upgrade to your vehicle’s performance, always consult a professional for advice before attempting any adjustments to ensure maximum safety and optimal results.

11 Methods on How to Make a Jet Ski Faster

1. Use a Performance Exhaust

One way to make your jet ski faster is to install a performance exhaust. A performance exhaust will allow your engine to breathe better, which will increase power and speed. Additionally, a performance exhaust will also reduce weight, which will also help to increase speed. If you are looking for the best performance out of your jet ski, installing a performance exhaust is one of the best ways to do it.

 Install a Performance Exhaust

2. Use a Performance Intake

Another way to increase the speed of your jet ski is to install a performance intake. A performance intake will allow your engine to take in more air, which will increase power and speed. Additionally, a performance intake will also reduce weight, which will help to increase speed. Try to find a performance intake that is lightweight and still provides adequate airflow.

3. Use a Performance Fuel Pump

Another way to make your jet ski faster is to install a performance fuel pump. A performance fuel pump will deliver more fuel to your engine, which will increase power and speed. Additionally, a performance fuel pump will also reduce weight, which will help to increase speed. Make sure to check with your manufacturer to ensure that you are using the correct fuel pump for your jet ski.

4. Use Lighter Weight Oil

One way to reduce the weight of your jet ski is to use lighter-weight oil. Lighter-weight oil will not only reduce the weight of your jet ski, but it will also allow your engine to run cooler, which will improve power and speed. While using lighter-weight oil will reduce weight, it is important to make sure that you use high-quality oil, so your engine does not suffer any damage.

5. Use Lighter Weight Grease

Another way to reduce the weight of your jet ski is to use lighter-weight grease. Lighter weight grease will not only reduce the weight of your jet ski, but it will also allow your engine to run cooler, which will improve power and speed. If you are using a two-stroke engine, lighter-weight grease will also help to reduce the amount of smoke produced by your engine.

Use Lighter Weight Grease

6. Remove Unnecessary Weight

One way to make your jet ski faster is to remove any unnecessary weight. Any weight that is not needed for the operation of your jet ski should be removed in order to raise the speed and improve the handling of your craft. This may include removing the passenger seat or any other items that are not essential for operation.

7. Add Ballast Weight Low and Forward

If you are looking for ways how you can make turns sharper on a Jet Ski, then one method you can do is by adding ballast weights low and forward on the craft’s hull. This can help in making the Jet Ski sit lower in the water, which increases its stability when making turns at high speeds, as well as improving its handling characteristics overall. Additionally, the addition of ballast weight can help in improving its acceleration as well.

8. Trim Tabs Installation

Trim tabs are another addition you can make on a Jet Ski that can assist in making it turn sharper as well as improving its stability when running at high speeds. By installing trim tabs on the back end of the hull near where the transom meets, it can act like an elevator on an airplane and “lift” the stern up out of the water. This helps decrease the contact between the transom and the water, thus reducing drag and allowing for sharper turns.

9. Hydrofoil Installation

Another modification you can do that would be beneficial in making a Jet Ski go faster as well as turn sharper is by installing hydrofoils. Hydrofoils work by lifting the hull out of the water, which in turn decreases drag on the craft, allowing it to reach higher speeds with less effort. Additionally, hydrofoils can also help in making the Jet Ski turn smoother and sharper while going at higher speeds.

10. Engine Modifications

One area that you could look into if you want significant gains in both speed and power would be engine modifications. This could involve anything from porting & polishing cylinder heads, changing cam timing, and adding aftermarket performance parts. Although these modifications will cost more upfront and require some mechanical knowledge, the end results could be quite impressive.

Require Some 
Mechanical Knowledge

11. Final Touches

Finally, some other touches you can add to your Jet Ski that may help with both speed and handling include installing a performance exhaust, using a higher octane fuel, as well as maintaining optimal tire pressure. All of these small modifications will help increase the performance of your jet ski and should not be overlooked.

By following these steps, you’ll be able to optimize your jet ski’s performance and achieve top speed and better handling. With the right adjustments and modifications, you can make your jet ski faster, sharper, and more enjoyable to ride.

Things to Consider When Making Jet Ski Faster

1. Maintenance:

Keeping your jet ski in good condition will help maintain its top speed and overall performance. Regularly check the oil, spark plugs, and other parts to ensure optimal performance.

2. Tuning:

A properly tuned engine will help increase speed and reduce fuel consumption. If you plan on adding any aftermarket modifications to your jet ski, be sure to have a professional mechanic tune it for the best results.

3. Intake and Exhaust:

Upgrading your intake and exhaust components can add more power to the engine, resulting in increased top speeds. Be sure that the upgraded components are compatible with your jet ski’s model before installation.

4. Supercharger or Turbocharger:

Adding a supercharger or turbocharger is one of the most effective ways to get more power out of an engine and boost its top speed significantly. This upgrade should only be undertaken by experienced mechanics.

5. Weight Reduction:

The lighter your jet ski is, the quicker it will accelerate and reach its top speed. If possible, remove any unnecessary weight (such as extra fuel tanks or accessories) to reduce drag and make the engine work less to reach higher speeds.

6. Propeller:

A propeller with a larger diameter will increase thrust, allowing for greater acceleration and improved top-speed performance. Be sure to select a propeller that is compatible with your jet ski’s model before installation.

A Propeller With 
a Larger Diameter

7. Fuel Quality:

Using high-quality fuel can help maximize the performance of your engine and contribute to increasing its top speed. Check with your local marine supply store for the best fuel for your jet ski.

Conclusion

If you want to make your jet ski faster, there are a few things you can do. First, focus on reducing drag by making sure everything is smooth and streamlined. Second, increase the power of your engine by upgrading to a bigger one or making modifications. And lastly, don’t forget to keep your jetski well-maintained – a clean and well-tuned machine will always outperform one that isn’t!

With these tips in mind, you should be able to make some serious speed gains out on the water. Thanks for reading our blog post on how to make a jet ski faster! We hope you found it helpful and informative. Happy riding!