Do you like to skateboard but don’t have anywhere to really do tricks? Well, fear not! You can make your own skateboard rail out of some PVC pipe, and it won’t take too much time or effort.
This tutorial will show you how to make a skateboard rail out of pvc pipe. So, whether you’re a beginner or an experienced skater, you’ll be able to create your very own skateboard rail in no time. Let’s get started!
What Causes a Skateboard to Stop?
There are several reasons why a skateboard may stop. The most common reason is that the wheels have lost contact with the ground.
This can happen if the board hits a rough patch of pavement or if the rider applies too much pressure on one side of the board. Another reason a skateboard may stop is that the bearings have become clogged with dirt and grime.
This is because the bearings are constantly spinning, which causes them to attract debris. If the bearings are not cleaned regularly, they will eventually become so clogged that the board will no longer be able to rotate the wheels.
Additionally, the board may stop if one of the trucks becomes loose. This can happen if the kingpin is not tightened properly or if the bushings are worn out.
The other reason a skateboard may stop is that the rider has reached the end of their ride. This is because the board will eventually run out of momentum and come to a stop.
Lastly, a skateboard may stop if the rider falls off. If the rider is not able to maintain their balance, they will eventually fall off the board, and the board will come to a stop.
Why Should You Make a Skateboard Rail Out of PVC Pipe?
It would be best if you made a skateboard rail out of PVC pipe for several reasons. PVC pipe is durable and will not break easily. Additionally, PVC pipe is weather resistant and will not rust. Moreover, PVC pipe is easy to cut and can be cut to any size you need.
If you want to make a skateboard rail that is 10 feet long, you can easily do so with PVC pipe. Another reason to use PVC pipe is that it is lightweight and easy to transport. If you want to take your skateboard rail to the park or to a friend’s house, you can easily do so with PVC pipe.
Furthermore, PVC pipe is inexpensive and will not break the bank. Finally, PVC pipe is easy to work with, and you can easily create a skateboard rail that is exactly what you want.
Step by Step How to Make a Skateboard Rail Out of Pvc Pipe
1. Gather Materials
The first step is to gather all of the materials you will need. For this project, you will need the following:
- PVC pipe
- PVC pipe cutter
- PVC primer
- PVC glue
- Measuring tape
- Sandpaper
Gather all of these materials before you begin. If you do not have a PVC pipe cutter, you can purchase one at your local hardware store. Try to find one that is at least 18 inches long.
2. Cut the PVC Pipe
Once you have gathered all the materials, the next step is cutting the PVC pipe. This is because the pipe needs to be the correct size for your particular skateboard.
Begin by measuring out the length you want your skateboard rail to be. For this project, we will make a skateboard rail 10 feet long. Once you have measured out the length, use the PVC pipe cutter to cut the pipe to size. First, mark the pipe where you want to cut it.
Second, put the PVC pipe cutter on the mark and squeeze the handle until the cutter goes all the way through the pipe. Cut the pipe as straight as possible, so take your time and be careful. Avoid cutting yourself on the sharp edges of the pipe.
3. Drill Holes
After you have cut the pipe to size, the next step is to drill holes in the pipe. This is because the holes will be used to attach the pipe to the skateboard. Begin by marking where you want to drill the holes.
For this project, we will drill two holes on each end of the pipe. Once you have marked the pipe, use a drill to make the holes. First, put the drill bit on the mark.
Second, squeeze the trigger and let the drill do its work. Drill the holes as straight as possible. Avoid making the holes too big, as it will be difficult to screw in the bolts.
4. Attach the Braces
After you have drilled the holes, the next step is to attach the braces. This is because the braces will help to support the pipe and keep it from moving around. Begin by measuring the distance between the two holes on one end of the pipe.
For this project, we will use 2x4s for the braces. Cut the 2x4s to size using a saw. First, mark the 2×4 where you want to cut it. Second, put the saw on the mark and squeeze the trigger. Cut the 2×4 as straight as possible.
Once you have cut the 2x4s to size, attach them to the pipe using screws and bolts. Screw the 2x4s into the holes you drilled in the pipe. Be sure to use screws that are long enough to go through the 2×4 and the pipe.
5. Insert the Bolts
After you have attached the braces, the next step is to insert the bolts. This is because the bolts will be used to attach the pipe to the skateboard. Begin by measuring the distance between the two holes on one end of the pipe.
For this project, we will use 8-inch bolts. Cut the bolts to size using a hacksaw. First, mark the bolt where you want to cut it. Second, put the hacksaw on the mark and squeeze the trigger.
Cut the bolt as straight as possible. Once you have cut the bolt to size, please insert it into the holes you drilled in the pipe. Be sure to use a long enough bolt to go through the pipe and the skateboard.
6. Add Washers and Nuts
After you have inserted the bolts, the next step is to add washers and nuts. This is because the washers and nuts will help to keep the pipe in place. Begin by adding a washer to each bolt. For this project, we will use 1-inch washers.
Once the washers are added, add a nut to each bolt and tighten it down. Be sure to use a wrench to help you tighten the nuts.
7. Attach the Pipe to the Skateboard
After adding the washers and nuts, the next step is to attach the pipe to the skateboard. This is a simple process, but be sure to take your time and be careful. First, put the pipe on the ground where you want it.
Second, put the skateboard on top of the pipe. Third, use the bolts to attach the pipe to the skateboard. Be sure to use a wrench to help you tighten the bolts.
If everything is done correctly, your skateboard rail should be attached to the skateboard and ready to use. Please avoid using the rail until it is completely secure.
8. Add the Wheels
After attaching the pipe to the skateboard, the next step is to add the wheels. This is because the wheels will help make the skateboard easier. Begin by measuring the distance between the two holes on one end of the pipe. For this project, we will use 8-inch wheels. First, take one wheel and insert it into the first hole.
Then, do the same with the second wheel. Make sure that both wheels are inserted evenly into the holes. Now, it’s time to attach the wheels to the skateboard. For this part, you will need some hardware. First, take a washer and place it over the end of the bolt.
Then, insert the bolt through the hole in the wheel and thread it into the second hole in the pipe. Repeat this process for the other wheel. Now, take a nut and screw it onto the end of each bolt. Be sure to tighten each nut securely.
9. Add the Bearings
After adding the wheels, the next step is to add the bearings. This is because the bearings will help make the skateboard easier to ride. Begin by measuring the distance between the two holes on one end of the pipe. For this project, we will use 8-inch bearings.
First, add the inner race to one side of the pipe. Next, insert the bearing into the other side of the pipe. Finally, add the outer race to the end of the pipe. You may need to use a hammer to tap it into place.
You Can Chack It Out to Make a Jet Ski Faster
10. Test It Out
After adding the bearings, the next step is to test them out. This is because you need to make sure that everything is working properly. Begin by placing the skateboard on the ground.
Then, stand on the skateboard and see how it feels. If everything seems to be working properly, then you’re done! Congratulations on building your own skateboard rail out of PVC pipe!
You Can Chack It Out Get Good at Skateboarding
Conclusion
So there you have it! Now you know how to make a skateboard rail out of PVC pipe. Follow the steps above, and you’ll be able to build your own rail in no time. We hope you enjoyed this tutorial and that you found it helpful. If you have any questions, feel free to leave a comment below. Thanks for reading!
You Can Chack It Out Can Ice Skates Cut You
