There’s nothing quite like the feeling of skating in a brand new pair of shoes. The grip is perfect, the responsiveness is on point, and you feel like you could skate all day. Unfortunately, that perfect feeling doesn’t last long. Skate shoes wear down quickly, and before you know it, you’re back to square one looking for a new pair.
But don’t worry – with a little bit of effort, you can make your skate shoes last significantly longer. In this post, we’ll share some tips on how to make skate shoes last longer. Read on to learn more!
10 Tips on How to Make Skate Shoes Last Longer
1. Locate the Areas Likely to Wear Down
Knowing how to make skate shoes last longer starts before you even step on the board. The first thing you should do is get acquainted with how your shoes wear down. The areas that get worn down the most are usually under your front foot and along the sides of the sole near where it bends, but every shoe is different, so look at how yours wear before you start.
Once you know how they wear down, look to see how fast it happens on average for how long they last. This will help you determine how often to replace them before the next skate session.
2. Apply Glue to the Stitches
Many shoes come with big areas of stitches that will end up coming apart and separating from the rest of the shoe. You can prevent this by applying a layer or two of glue to those seams before you skate in them for the first time. This makes skate shoes last longer tip helps keep them together, making it easier to keep them glued since you can’t apply glue to already-worn areas.
3. Get Suede Shoes, Avoid Canvas
The how to make skate shoes last longer tip that can be the most useful is how to get suede shoes. Suede is naturally waterproof, so it doesn’t absorb any moisture as canvas does. The same skate shoes last longer tip also applies to leather; they are tanned and don’t drink much water either.
4. Spot Clean Regularly
When how to make skate shoes last longer does come time to clean the bottoms of your shoes; it’s important not to get them soaking wet because that will actually cause them to wear down faster. Instead, use a stiff-bristled brush like an old toothbrush and some warm water and scrub off dirt and debris. If you want to use soap, make sure it’s thoroughly rinsed out because soap residue can actually attract dirt and make skate shoes last longer progress faster instead of making it stop.
5. Use Shoe Goo to Patch Holes
If there are any holes in how to make skate shoes last longer, you can patch them up with a powerful adhesive like Shoe Goo. Just put a small amount on the hole and let it dry for 24 hours. This will help to make skate shoes last longer and keep them from falling apart.
6. Use Suede From Old Shoes or Tricktape
If you want to make your skate shoes last longer, you can use suede from old shoes or Tricktape. Tricktape is a type of tape that you can use to reinforce the areas of your shoes that tend to wear out the quickest.
7. Preventing Skate Shoe Laces From Ripping
There’s no way to make skate shoelaces last forever, but you can take some precautions to ensure they’ll endure for a while before ripping. Here are a few tips:
Take good care of the eyelets in your shoes. Metal grommets and rivets in newer-model running shoes or skateboarding footwear will inevitably pop out over time, but it’s easy to fix. Just remove the rusted or broken pieces with an awl (or similar tool) and replace them with new ones.
And how do you make skate shoes last longer for outdoor skating? There’s no way to entirely prevent your shoelaces from wearing out, especially if you skate outdoors. However, you can do a few things to make your laces last longer in wet conditions. Just follow these simple tips:
Seal the Edges of Your Shoes: If you skateboard in the rain often, consider buying some waterproofing sealant at a local hardware store and applying it to the edges of your shoes. It
8. Create Your Own Rubber Toe Cap Using Plasti Dip
Are you worried about how your joints are holding up? Turn some cheap, ordinary rubber on its side, and you’re all set. It’s a trick originally shown to us by Taylor Nawrocki of Chocolate Skateboards, who uses the stuff on just about everything. Just paint some thick coats onto your toe caps or any other rubber parts that might be wearing thin, and let them dry overnight. The rubber will gain a newfound toughness to help it survive many more hucks to the rail or ledges.
9. New Grip? Sand It Down
You’ve seen how your brand new grip tape gets all shredded up after just one day on the board. This is both unsightly and annoying, but if you sand it down now (before it’s too gnarled), you can make them look great for much longer. Start by wetting the board with some water–this will help the sandpaper dust float away when you start sanding.
Then, just take your 60 or 100 grit paper and gently go over the surface, taking off all the nicks left by skate trucks and hard wheels. Once you’re done with that, do it again with some 220 grit paper for a truly smooth grip tape job.
10. Get Non-Abrasive Dkl Grip Tape
Non-abrasive grip tape is a lifesaver when it comes to preserving your skate shoes. It can be a little more expensive than the standard variety, but it’s worth it in the long run. Not only will this stuff last longer, but it also won’t damage your shoes in the same way that regular grip tape can. So if you’re looking for a way to make your skate shoes last even longer, consider investing in some non-abrasive grip tape.
11. Stay Away From Hot Glue
Hot glue is a popular choice for skateboarders looking to repair their shoes, but it’s not the best option. The problem with hot glue is that it can be very abrasive, and it can also cause the shoes to crack and peel. If you’re looking for a quick fix, then hot glue might be the way to go, but it’s not the best long-term solution.
What Are Skateboarding Shoes Made Of?
Skateboarding shoes are made of various materials, including suede, leather, nylon, and rubber. In addition, they often have a rubber toe cap to protect the front of the shoe from damage. Skateboard shoes are also usually equipped with grip tape on the soles to provide better traction when skating.
How Long Should Canvas Shoes Last?
If you are looking to make skate shoes last longer, you should consider canvas shoes. Canvas shoes usually last longer than other materials, such as suede or leather. In addition, they are often less expensive than other types of skateboarding shoes.
Why Is Durability Important for Skate Shoes?
Durability is important for skate shoes because it helps to protect the shoes from damage. This is important because skateboarding can be a tough sport, and the shoes need to be able to withstand the abuse. In addition, durable shoes last longer, which is important since skateboarding can be an expensive hobby.
Frequently Asked Question
How Long Should I Expect My Skates to Last?
There is no definite answer as to how long skate shoes should last. This varies depending on how often you use them, how well you take care of them, and the type of skate shoes you have. However, following some simple tips can help your skate shoes last longer.
- Wipe your skate shoes down after each use to remove any dirt or debris.
- Store your skate shoes in a cool, dry place when not in use.
- Avoid leaving them in direct sunlight or in high temperatures.
- Replace the laces on your skate shoes every few months to keep them in good condition.
- If your skate shoes start to smell bad, try using a baking soda and water paste.
Are There Any Downsides to Using a Different Kind of Glue on Your Skates than The One that Comes with Them?
There are a few downsides to using a different kind of glue on your skates than the one that comes with them. First, the new glue may not be as strong as the original glue, leading to your skates falling apart. Second, using a different glue can be more complex and time-consuming than using the original glue. Finally, using another type of glue may not be as effective in keeping your skates together.
Conclusion
Skate shoes are not cheap. They’re an investment in your skateboarder lifestyle, and you want to make sure that they last as long as possible. The key is looking after them well enough so that the materials don’t break down too quickly or suffer from premature wear and tear. You need to look out for these common mistakes when caring for your skates!
It might seem like a lot of effort at first, but it will pay off with less time spent on maintenance and more skating!! Thanks for reading our post about how to make skate shoes last longer.
You may also read: How to Make Roller Skates Slower
