How to Put Longboard Wheels On A Skateboard

In many ways, a skateboard and a longboard are the same – both are meant for cruising around town and doing tricks. However, there are some key differences, the most obvious of which is the wheel size. Skateboard wheels tend to be much smaller than longboard wheels, so they can’t necessarily do the same things.

If you want to be able to ride a skateboard like you would a longboard, one option is to put longboard wheels on your skateboard. This article will show you how to put longboard wheels on a skateboard.

Skateboard wheels are typically smaller in size, while longboard wheels are much larger. This difference makes longboard wheels better suited for cruising and doing tricks, while skateboard wheels are better for more advanced maneuvers.

How to Put Longboard Wheels On A Skateboard

Required Materials

  • Longboard Wheels
  • Skateboard
  • Allen Wrench

How to Put Longboard Wheels On A Skateboard Step by Step

Step 1: Determine

First, you have to determine how many bearings your skateboard has. There are three types of bearings:

  • one bearing in the middle of the truck  (also known as a single bearing truck)
  • two bearings on either side of the truck (also known as a double bearing truck)
  • two separate bearings for each wheel on either side of the truck (also known as a double bearing split-wheel truck)

Step 2: Decide How Many Bearings Your Longboard Has

If it has one single bearing in the middle of the deck, then you will only need to remove the kingpin from your skateboard.

Bearings Your Longboard Has

If it has two bearings on either side of the deck, you will need to buy two kingpins for your longboard.

If it has two separate bearings on either side of the deck, you will need one kingpin for the back truck and another for the front truck.

Step 3: Gather All Tools Required for Your Project

You’ll need the following to put longboard wheels on a skateboard:

  • Longboard wheels
  • Remember that you will need 3/4x the number of bearings as you have wheel size.
  • Skateboard wheels (if your board doesn’t already come with them)
  • Longer axles for your skateboard (if your board doesn’t already come with them)
  • Two adjustable wrenches
  • Longboard bearing grease
  • In some cases, you may need a screwdriver or Allen key to remove the old bearings from your longboard wheels. If this is the case, be sure to have one on hand.

Step 4: Take the Trucks Off

Take the trucks off your skateboard and the bearing off of your longboard. If you have one kingpin, take it out of the truck with one bearing and replace it with the kingpin you bought for your project. If you have two separate bearings, then take out both bearings from each of your wheels and replace them with the new ones (you may want to buy some spare bearings in case they get ruined when putting longboard wheels on a skateboard ). You can purchase extra bearings here.

Putting Longboard Wheels on Skateboard

Step 5: Take Out the Axle Off

Take the axle off your longboard trucks. If you have one kingpin, just take out the axle that fits into that truck. If you have two separate bearings, then take out both axles and replace them with the new ones. Some people find it easier to use a screwdriver or Allen key to remove the bearings, while others find it easier to use a wrench. Experiment with different methods and see which one works best for you.

Step 6: Put on the Longboard Wheels

Once you’ve put your bearings in your longboard wheels, it’s time to put the wheel onto the skateboard. On one side of each wheel, there are two small holes where you will need to put the axle through. Position the wheel-how you’d like it on top of your deck. Take that end with the holes and line it up with the skateboard trucks and their axle. Push it through one at a time, and make sure that they’re both lined up well.

On your bearings, there will be cone shapes around the outer race where you should put your wheel nuts. Hold onto those as you place each nut (one on each side) onto the axle. Use a skate tool to tighten them down. If they were in really tight, it’s possible that your wheel nuts might break when you try to unscrew them. If this happens, you’ll need a new nut and screwdriver set from your local hardware store or skate shop.

The last thing you need to do is add the rubber gasket (skateboard grip) and the wheel-nuts. Tighten them down to how you like, and give your board a test ride!

Step 7: Test Out Your New Longboard

Now that your longboard wheels are on there how you like them, you’re probably anxious to see how they work. The best thing to do is take it for a test run. If you have a longboard ramp or skate park around, this should be easy. Just take the board down and see how it feels when you’re pushing with one foot and riding with the other.

Test Out Your New Longboard

If you don’t have a place nearby, take your new longboard out on the street and see how it feels while riding. If you don’t like how the deck feels to push on or how easy it is to ride, you can adjust your wheel nuts and wheel bushings until you’re completely satisfied.

Keep reading for more information about how to put longboard wheels on a skateboard.

You Can Check It Out to Put Bearings in Longboard Wheels

How to Put Longboard Wheels On Skateboard?

It’s actually not too difficult to put longboard wheels on a skateboard. In fact, it’s really just the same process as putting wheels on any other type of board. Here are the steps:

  1. Remove the four screws that hold the existing skateboard wheels in place.
  2. Mount the new longboard wheels in their place, making sure that they are aligned properly.
  3. Replace the screws and tighten them up so that the wheels are secure.
  4. Get on your board and enjoy!

What to Avoid?

There are a few things to avoid when putting longboard wheels on your skateboard. First and foremost, do not try to use longboard wheels on regular skateboard trucks- this will result in a very slow ride. Additionally, be sure to add riser pads if you choose to use longboard wheels on skateboard trucks, as this will help to prevent wheel bite and keep your board stable.

Why Do Different Wheel Types Matter?

The type of wheel that you use on your skateboard can have a significant impact on how the board performs. For example, if you are using longboard wheels on regular skateboard trucks, you will experience a much slower ride. Additionally, it is important to use the right type of wheel for the type of skating that you plan to do.

Different Types of Skateboard Wheel

For example, if you plan to do a lot of tricks, you will need a wheel that is designed for tricks. Conversely, if you plan to do a lot of cruising, you will want a wheel that is designed for cruising.

If you want to know more about how to put longboard wheels on a skateboard, keep reading.

Frequently Asked Question

Which Types of Bearings Should I Use with My Longboard Wheels?

There are three types of bearings that you can use with longboard wheels: ABEC-5, ABEC-7, and ABEC-9. The higher the number, the more accurate the bearing will be. Most longboarders use ABEC-7 or ABEC-9 bearings.

How Do I Mount My Longboard Wheels to My Skateboard Deck?

There are a few different ways to mount your longboard wheels to your skateboard deck. One way is to use longboard wheel spacers. Another way is to use risers. And the last way is to use washers.

Which Type of Trucks Should I Use with My Longboards?

There are three types of trucks that you can use with longboard: standard, inverted, and carving.

The standard truck is the most common type of truck and is best for beginners. The inverted truck is flipped upside down and is best for more advanced riders. Finally, the carving truck is curved and is best for riders who want to do tricks.

How Do I Put Longboard Wheels On A Skateboard?

  1. Choose the type of bearings you want to use.
  2. Choose the type of truck you want to use.
  3. Mount the longboard wheels to the skateboard deck.
  4. Tighten the bolts on the truck.

What Are the Best Longboard Wheels for Skateboarding?

There are a variety of longboard wheels available on the market, and it can be challenging to determine which ones are the best for skateboarding. Some of the most popular longboard wheels for skateboarding include Sector 9 Butterballs Wheels, Bones Reds Bearings, and Paris V2 180mm 50 Degree Longboard Trucks.

Do Longboard Wheels Fit on Skateboard Trucks?

This question is yes; longboard wheels can fit on skateboard trucks. However, it is important to note that doing so will result in a much slower ride. Additionally, it is recommended that you add riser pads if you choose to use longboard wheels on skateboard trucks, as this will help to prevent wheel bite and keep your board stable.

Conclusion

So there you have it! That’s how to put longboard wheels on a skateboard. It may seem daunting at first, but you should be able to do it like a pro with a bit of practice. So now get out there and start cruising those hills!

You may also read: How to Skate Switch

Leave a Comment