How to Repair a Ding in a Surfboard

In the world of surfing, there are a few cardinal sins. One of them is letting your surfboard get too beat up and damaged. A ding in your board can affect its performance in the waves.

How to Repair a Ding in a Surfboard

But don’t worry; there are ways to repair a ding in a surfboard without purchasing an entirely new one. In this blog post, we will go over how to repair a ding in a surfboard so that you can get back out on the waves as soon as possible! Keep reading to learn more.

What Causes Dings in Surfboards?

Several things can cause dings in surfboards. The most common cause is hitting your board on something hard, like a rock or another surfboard. This can happen when you’re paddling out to catch a wave or if you wipe out and your board hits the water with force. Dings can also be caused by dropping your board on a hard surface, like concrete.

Another common cause of dings is worn and tear. Over time, your board will get scratched and chipped from repeated use. This is especially true if you don’t take good care of it and store it properly when you’re not using it. Additionally, sun and salt water can also cause damage to your board over time.

The other main cause of dings is bad waves. If you’re surfing in an area with a lot of rocks or coral, it’s more likely that you’ll get a ding on your board. Lastly, boards that are made of softer materials are more likely to get dinged than those made of harder materials.

Can Cause Dings in  Surfboards

Why Should You Repair a Ding in Your Surfboard?

There are a few reasons why you should repair a ding in your surfboard. First, it can help to prevent further damage to your board. If you have a small ding, it will likely get bigger over time if you don’t repair it. Second, repairing a ding can help improve your board’s appearance.

A ding can make your board look old and worn, so repairing it can help it to look new again. Another reason to repair a ding is for safety. A large ding can make your board unstable and more likely to break, which can be dangerous.

Finally, repairing a ding can help preserve your board’s value. A ding can decrease its value if you plan on selling or trading in your board. Repairing the ding can help you get a better price for your board.

Some Simple Ways How to Repair a Ding in a Surfboard

1. Use a Surfboard Repair Kit

If you have a small ding, you can use a surfboard repair kit to fix it. These kits come with everything you need to fix a ding, including a putty knife, sandpaper, and fiberglass cloth. To use the kit, first, sand down the area around the ding to rough it up.

This will help the repair kit adhere better. Next, apply the putty to the ding and use the knife to spread it out. Then, apply the fiberglass cloth over the putty and let it dry. Once it’s dry, sand it down, and you’re good to go!

2. Use Super Glue

Another way to fix a small ding is to use super glue. Super glue is great for small dings because it dries quickly and it’s easy to use. First, clean the area around the ding with a cloth.

Then, apply a small amount of super glue to the ding and wait for it to dry. Once the super glue is dry, sand the area around the ding to smooth it out. If the ding is still visible, you can apply another layer of super glue and repeat the process.

The Electric Skateboard  Is Fully Charged

3. Use Epoxy Resin

For bigger dings, you’ll need to use epoxy resin. Epoxy resin is a strong adhesive that can be used to fix larger dings on your surfboard. To apply epoxy resin, you’ll need a putty knife and some sandpaper.

First, use the putty knife to apply the epoxy resin to the ding. Then, use sandpaper to smooth out the area around the ding. Finally, apply a layer of wax to the area to protect it from the sun and salt water. If done correctly, epoxy resin will make your surfboard as good as new.

4. Use Fiberglass Tape

Fiberglass tape is another great way to fix a ding in your surfboard. It is a little bit more difficult to use than the other methods, but it will create a stronger and more durable repair. To use this method, you will need to purchase some fiberglass tape, a resin kit, and some sandpaper.

First, you will need to sand down the area around the ding to rough it up. This will help the tape to adhere to the surface of the board. Next, cut a piece of tape that is slightly larger than the ding itself.

Apply the tape to the board’s surface and carefully smooth out any bubbles. Once the tape is in place, you will need to mix up the resin according to the instructions on the kit. Once it is mixed, apply it over the top of the tape. Be sure to smooth out any bubbles that may form.

5. Use Bondo

Bondo is a product that is specifically designed for repairing dings in surfboards. It is a putty-like substance that dries hard and can be sanded down to create a smooth surface.

To use Bondo, first, mix together equal parts of the resin and hardener. Then, apply the mixture to the ding using a putty knife. Smooth it out so that it is level with the rest of the board. Let it dry for 24 hours. Once the Bondo is dry, sand it down until it is flush with the rest of the surfboard. You may need to use a power sander for this. Finally, apply a layer of wax to the area to protect it from the elements.

6. Use Boiling Water

Boiling water is a quick and easy way to fix a ding in your surfboard. This method works best on small dings.

To use this method, you will need boiling water and a pot. First, bring the pot of water to a boil. Next, carefully pour the boiling water over the ding. Be sure to pour the water evenly over the entire ding. Finally, use a spoon to press the ding back into place. This method is not recommended for large dings. Large dings require a more thorough repair.

Use Fiberglass Tape

7. Use a Hairdryer

A hairdryer can be used to fix a small ding in your surfboard. This method works best on dings that are caused by heat. To use a hairdryer to fix your ding, ensure the area is clean and dry.

Then, turn the hairdryer on to its highest setting and hold it about six inches away from the ding. Move the hairdryer back and forth over the ding until the area is warm. Once the area is warm, use your fingers to press the Ding out from inside the surfboard. If the Ding is too large to be removed with your fingers, use a putty knife or other sharp object to scrape it out.

8. Use a Vacuum Cleaner

A vacuum cleaner can also be used to remove a Ding from your surfboard. It is best to use a handheld vacuum cleaner for this task. First, make sure that the area around the Ding is clean.

Next, put the vacuum cleaner over the Ding and turn it on. The suction will pull the Ding out of the surfboard. Finally, use a hairdryer to heat the area around the Ding and make the repair permanent.

Tips and Warnings on How to Repair a Ding in a Surfboard


  1. Use a sharp knife to remove any dangling pieces of fiberglass or resin carefully.
  2. Wear gloves and a long-sleeved shirt to protect your skin.
  3. Use a resin repair kit to patch the hole, following the instructions carefully.
  4. Allow the repaired area to dry completely before sanding it smooth.
    1. Apply a new layer of wax to the repaired area for protection.


  1. Do not try to repair a large hole or crack in your surfboard without professional help.
  2. Avoid using solvents or chemicals near the repair area, as they can damage the surfboard.
  3. Do not sand the repair area too vigorously, as this can damage the surfboard.
  4. Do not use the surfboard until the repair area is completely dry. Otherwise, the repair may not be effective.
  5. Never attempt to repair a surfboard without the proper tools and materials. Otherwise, you may cause further damage to the board.
Use a Vacuum Cleaner


So there you have it, some different ways How to Repair a Ding in a Surfboard. No matter what type of Ding you have, a repair method will work for you. Just be sure to follow the tips and warnings above to avoid damaging your surfboard further. With a little time and effort, your surfboard will look as good as new in no time!

You can check it out to Remove Rust From Skis