How to Revert Skateboard

Skateboarding can be a lot of fun, but it’s essential to be safe while you’re doing it. One way to stay safe is to know how to revert skateboard if you find yourself in a difficult situation. There is nothing better than riding a skateboard around town in the summer. However, sometimes you may get a little too confident and end up wiping out. This move will make you a lot more confident on your board and allow you to perform tricks with ease. In this post, we’ll teach you how to do just that! So stay safe and have fun out there!

Revert a skateboard is a move that will help you stay safe while you’re skateboarding. If you find yourself in a difficult situation, knowing how to make this move will help you get out of it quickly and easily.

How to Revert Skateboard

Required Materials

  • Skateboard
  • File
  • Sandpaper
  • Paint
  • Paintbrush
  • Clearcoat (optional)

Your skateboard deck

Your skateboard deck is an essential piece of equipment. If you want to learn how to revert skateboard, you first need a deck that you are comfortable using. Your deck should be the correct size for your height. Kids’ boards can range from 7 to 10 inches wide and 25 or more inches long, depending on whether they’re.

Most skaters prefer medium to large decks. Boards that are too small can cause stability problems and will only seem appropriate for a beginner, and boards that are too big can be difficult to maneuver, and they might not feel comfortable enough to attempt tricks.

Correct Size for Your Height

Safety equipment

Safety equipment is not required when learning to revert skateboard, but it is highly recommended.

Step 1

Put the skateboard’s nose against a solid surface; depending on your skill level and preference, either you can place it at a rail or ledge.

Step 2

Pop the tail end of the board off the ground and balance on the tail of the skateboard with your back foot, push the nose of the board towards the wall and slide the board away from the rail, making sure that you lean into it while doing this.

Step 3

Turn around and repeat these steps to revert back to a regular stance.

That’s pretty much it!

You Can Check It Out to Keep Momentum on a Skateboard

Silent skateboarding

A silent skateboarding area is made with an obstacle, for instance, stairs. These are then skated in a fashion that allows the skateboarder to move in an opposite direction on the ground. This is known as a revert and is not commonly used when performing street tricks.

Silent Skateboarding

Overcoming the fear of landing after performing a revert is important for this trick. It may take a few tries before you get the trick right, but once you master it, you can practice by trying to get more and more height into your jump.

  1. Place your front wheels on top of an obstacle higher than 3 inches. You should be able to see over the object when standing above it usually. This will be your starting point.
  2. Start by prepping your board with a backside 180 so that your front wheels are on the other side of the obstacle. The direction you are facing should be opposite to what you would normally perform for a backside 180. For example: if you normally go onto the obstacle with your right foot, turn slightly and place your left foot on the obstacle. This is a crucial step as you will end up spinning 180 degrees.
  3. When you feel ready, take off from one wheel. You should be able to land with both wheels on top of the obstacle and not fall back onto it or make contact with it at all after completing the revert.
  4. To get more height on the board, instead of putting all your weight on one foot once you have landed, place half on both feet and gain some air by jumping off both feet.
  5. You need to perform the 180 with a good deal of spinning speed, or it will not work out correctly.

A Stepwise Guide on How to Revert Skateboard

Step 1: Position Your Feet on the Skateboard

Place your left foot by putting it on top of the front truck and right foot near the back wheel. Ensure that your feet are approximately shoulder-width apart. Your weight should be distributed evenly between both feet with a little pressure towards the front for momentum and balance.

Step 2: Bend Your Knees

Lean forward a bit, slide your hands to the tail and bend both knees. Your back should be straight with your head up, looking forward, not down at the deck of the board. This will help you balance as you push off with one leg to gain speed.

Step 3: Move Your Shoulders First

As you push off with your back foot, it will transfer weight to the tail of the skateboard. This is important when timing your push-off because it will put pressure on the nose of the board, which makes it easier to lift.

Move Your Shoulders First

Step 4: Make Your First Push

With one knee bent, push with the leg on the backside of the board. This will be the leg closest to the direction you want to go in. Push hard and fast enough to gain speed but not too much where you lose control and fall flat on the ground. Step 4: Transfer your weight

Step 5: Pop the Tail

Quickly lift your back foot up and put the pressure on the front of the board. This will cause it to pop out in front of you. As you do this, make sure to lean back slightly with your shoulders again because if you lean forward too much, the chances are that your nose will hit the ground.

Step 6: Pull Your Back Foot Up

Once the skateboard is in front of you, quickly pull your back foot towards the tail of the board. It should come right up to meet your front foot and with one quick motion, place it on top of the deck. This will now be considered pushing off with your back foot again.

Step 7: Follow With Your Hips

As you bring your back foot forward, shift your weight on it so that the skateboard will follow. Essentially, this is making sure that both feet are in opposite positions and you are ready for the pop and trick. Keep reading to know more about how to revert skateboard.

Step 8: Complete the Reverting Process

At this point, you can either do a kick turn and jump back on the board to repeat the process or simply step off of your board. Note that when walking to your skateboard, always take long strides and have your knees bent. It is also important to keep in mind that you only need one foot in order to walk with it, so there is no need to put both on the ground.

Complete the Reverting Process

Step 9: Now Enjoy Your Newly Learned Revert Skateboard!

Now that you can revert go back up and practice those combos. All of the hard work has already been done, so what you need now is determination and some time on your skateboard to hone your skills. You will find that reverting is a lot easier than it seems once you get used to it. So keep practicing, and soon enough, you’ll be able to revert like a pro!

You Can Check It Out to Carry Skateboard on Bike

Frequently Asked Question

Which method would be better: sanding, patching, or gluing?

There are a few methods you can use to fix a skateboard: sanding, patching and gluing.

  • Each method has its own set of pros and cons, so it’s important to choose the one that will work best for your specific situation.
  • Sanding is a good option if the affected area is relatively small. It’s also a good choice if you’re looking for a quick and easy fix.
  • Patching is a good option if the affected area is large. It’s also a good choice if you’re looking for a more durable repair.
  • Gluing is a good option if the affected area is severely damaged. It’s also the best option for repairing cracks.

Should I use wood glue or superglue on my board?

There are pros and cons to both wood glue and super glue.

Wood glue is a better option because it is more durable and less likely to break. However, superglue is a good option if you need a quick and easy fix.

Use Wood Glue or Superglue

What is the best way to revert a skateboard?

There is no definitive answer to this question. Depending on the situation, different methods may be better than others. Some of the most common methods include sanding, patching, and gluing. Each of these has its own set of pros and cons, so it’s important to choose the one that will work best for your specific situation.

What are the pros and cons of each of these methods for repairing a skateboard?

There are a few methods you can use to fix a skateboard: sanding, patching and gluing.

  • Each method has its own set of pros and cons, so it’s important to choose the one that will work best for your specific situation.
  • Sanding is a good option if the affected area is relatively small. It’s also a good choice if you’re looking for a quick and easy fix.
  • Patching is a good option if the affected area is large. It’s also a good choice if you’re looking for a more durable repair.
  • Gluing is a good option if the affected area is severely damaged. It’s also the best option for repairing cracks.

What are the pros and cons of each of these methods for repairing a skateboard?

There are a few methods you can use to fix a skateboard that has been warped: sanding, patching, and gluing.

  • Each method has its own set of pros and cons, so it’s important to choose the one that will work best for your specific situation.
  • Sanding is a good option if the affected area is relatively small. It’s also a good choice if you’re looking for a quick and easy fix.
  • Patching is a good option if the affected area is large. It’s also a good choice if you’re looking for a more durable repair.
  • Gluing is a good option if the affected area is severely damaged. It’s also the best option.

Conclusion

If you can’t seem to stop riding a skateboard, here’s how to revert skateboard. Reverse the motion of your back foot and lean towards it while pushing off with your front foot. You should be able to land on both feet now! Happy skating!

You may also read: How to Tic Tac on a Skateboard