How to Skate Switch

I’m sure by now you have seen people skating switch and maybe even tried it yourself. It might seem easy, but doing frontside and backside tricks control is a lot harder than you think. This article will teach you how to skate switch and give you some tips on making it more accessible. So let’s get started!

Skate switch is more accessible when you are comfortable skating regular. If you can’t skate regularly, I recommend taking some lessons. Once you are comfortable skating switch, it’s time to learn how to ollie switch. Don’t worry; this is not as hard as it sounds.

How to Skate Switch

What Is Switch Stance in Skateboarding?

A switch stance is commonly known as skating “goofy” or with your opposite foot in front.  This gives you a wider base and additional balance, making it easier to do tricks like nollie and fakie.  It might take some getting used to, but once you get it down pat, switch skating can open up an entirely new world of tricks for you!

When learning skate switch, start by standing in your normal stance.  Then try to imagine that there’s a massive X on the ground in front of you with arrows pointing towards each direction–one arrow indicates forwards, and one arrow points back. Next, with this image in your head, a picture that you’re standing in the middle of the X with one foot pointed towards each arrow. That’s switch stance!

A Stepwise Guide on How to Skate Switch

Step 1: Preparation

Start by lacing your skates. First, you must lace them up to the loosest holes so that you can tighten them with a knot quickly after the time comes for you to add speed. Secondly, it is good practice to put on thick socks when learning Skate Switch as this will help cushion any falls and keep your ankles warm in the process.

Next up, turn both of your wheels so that they spin clockwise. Then, if you want Skate Switch in a counter-clockwise direction, switch the left wheel for a proper rotation and vice versa. Alternatively, if Skate Switch proves too difficult at first you can rotate all four wheels into one degree position – say, three clockwise and one anti-clockwise – allowing you to Skate Switch in a counter-clockwise direction.

Lacing Your Skates

Finally, grip the ground with all ten of your toes firmly; this will keep Skate Switch stable and consistent as you build up speed. Give it a shot anyway; most people naturally Skate Switch in the same direction they walk, so you might have better luck turning left than right!

Step 2: Get Rolling

Now it’s time to add some speed. How you do this is up to you, but an excellent way to build momentum is to run next to your board and push it forward with one of your hands every few steps. Once you find that you can no longer keep up with the board or lift it off the ground when pushing it at a certain pace, go ahead and begin using your feet alone.

Again, how fast you move the board forwards with your feet is really up to you; be aware that slower paces will result in a more stable Skate Switch but take longer than higher speeds which might not be as consistent.

To add on top of this, it’s also lovely to shuffle your feet back and forth while running alongside the board, so it acts as an extra speed booster! How often you do this is entirely up to yourself and should depend on how long and high you want your steps to be while skating switch. You can even skip straight to Flamingos if you’d like: lift one foot behind the other while running over the board at all times – easy!

Step 3: Perfecting Skate Switch

At this point, you should have a good idea of how to build up speed; now, it’s time to learn how to stop doing so by using your feet simultaneously. How you do this is simple – whenever you are ready, lift one foot off the ground and place it on top of your board instead. How far behind or ahead you put that foot depends solely on whether Skate Switch is clockwise or anti-clockwise because otherwise, they will cancel each other out!

It might be difficult at first because both motions require opposing muscles to work together, but don’t worry. After all, this feeling will improve over time as long as you practice often enough! Eventually, repeating Skate Switch over and over again will allow you to get a good sense of how fast you need to push the board forwards while also knowing when to lift your original foot off the ground. Combined with a bit of shuffling while running next to it, this should become a breeze!

Perfecting Skate Switch

Step 4: Moving Around

Once you have grasped a good understanding of Skate Switching, only then can you start adding more complicated motions into the mix. Experiment with different speeds and positions on the board until something feels right, then keep repeating it until it becomes second nature. How many steps or tricks you do is down to how good Skate Switching you find yourself after practice.

Often people learn how to Skate Switch fairly quickly but find it hard to keep up with specific techniques or motions, so keep working on what you are confident with until it becomes second nature!

Step 5: Exercises

To improve and increase your coordination, try standing on the edge of the board with one foot while practicing Skate Switch. How far you stand from the center of the board is entirely up to yourself, but make sure that your weight is all focused on one leg because otherwise, it might feel like balancing a pencil on its tip!

How long you can stay in this position should depend on how well you can balance. Some people who have no problem balancing will be able to do this for hours because there isn’t any pressure put onto their muscles. These steps will help in how to skate switch.

You Can Check It Out to Lace Skates for Wide Feet

Tips and Warnings

Tips

  • If you are practicing the switch stop, make sure to do it before starting moving.
  • Your weight should be on your back foot at all times when skating switch; this will allow you to jump over or push off things much more accessible. You can practice this by pushing out with your back foot at every stride while standing still, working up to speed as needed. This will also help you get comfortable using your muscles opposite to usual.
  • You may find a slight delay between when you want to turn and when the board responds during the early stages of learning how to skateboard switch. Don’t worry; once your muscles are used to making both motions together, this will go away completely. To speed the process up a bit, try turning quickly one way and then back again, but do not jump or move your feet. It can be helpful to get a friend to hold you from behind when learning how to skateboard switch so that you can turn either way without worrying about falling.
  • If possible, it is best for your board to have loose trucks when learning how to skateboard switch. This will ensure that the wheels are free to pivot around the kingpin and that there isn’t any unnecessary tension on them while you’re trying to learn how to skateboard switch. However, if your trucks are too loose, this may cause unwanted movement while skating at speed.
Practice Skateboard Switch

Warnings

  • It is straightforward to get frustrated when practicing how to skateboard switch, especially in the beginning. You may want to have a low threshold for frustration while you are learning this trick – if it’s not working, just take a break and try again later.
  • Many people fail to include all of these tips when they teach themselves how to skateboard switch, but they are vital to success! Be sure that you have covered all aspects of this How-to guide before you try jumping.

What Is Pushing Switch Skateboarding?

A pushing switch is a way of propelling yourself forward on your skateboard without using the front foot. This type of skating involves both feet facing forward, one on either side of the board, slightly in front of the other. The back foot remains in its usual spot at the back of the longboard deck while pushing to accelerate and keep the momentum going forward.

Pushing a switch is one of the most challenging skateboard tricks, as it takes a fair bit of coordination. However, it’s also important to mention that making a switch is NOT the same thing as riding a fakie.

Pushing Switch Skateboarding

To push the switch, you need to turn quickly and pivot on your back wheels using all your weight so you don’t fall over. This might sound easy at first, but once you try it at full speed, you’ll see how hard this can be!

Conclusion

Skating a switch is a challenging task, and you might need to put in some time before it becomes natural. But the payoff will be well worth all of your hard work! I hope this article on how to skate switch has given you some helpful tips that can help get you started on mastering this trick. Good luck!

You may also read: How to Make My Skateboard Faster

Leave a Comment