How to Slide Longboard

Sliding a longboard is an amazing experience that can take your riding to the next level. In this blog post, we will teach you how to slide longboard like a pro! Keep reading for instructions on how to execute this trick safely and effectively. With a bit of practice, you’ll be sliding like a pro in no time!

How to Slide Longboard

What Is a Slide on A Longboard?

A slide on a longboard is a move where the rider stays in contact with the board while intentionally letting their weight shift to one side. This causes the board to turn sideways, and the rider can then ride out of turn. As a result, slides can change directions, slow down, or even stop completely.

They are also one of the most stylish tricks that can be done on a longboard. To execute a slide, the rider starts by shifting their weight to one side of the board. Next, the front foot is placed slightly ahead of the back, and the shoulders are turned in the same direction as the front foot.

The rider then uses their back foot to push against the ground and initiate the turn. Again, the front foot is used to control the speed and direction of the slide, and the back foot remains in contact with the board to help keep it stable.

Once the slide is complete, the rider shifts their weight back to center and resumes riding. With practice, slides can be done smoothly and effortlessly. They are essential for any longboarder who wants to shred with style.

Why Should You Slide on A Longboard?

There are plenty of reasons to slide on a longboard. For one, it’s an incredibly exhilarating experience. The speed, the wind in your hair, the sense of freedom – it’s all quite intoxicating. But beyond that, sliding can also help you improve your skills as a longboarder.

It gives you a chance to practice balancing and control at high speeds and can also help you to fine-tune your footwork. In addition, sliding can be used to stop in an emergency safely. So whether you’re looking for a thrill or want to become a better longboarder, sliding is well worth your time.

How to Slide Longboard Step by Step Guide

Step 1: Select Your Longboard

The first step to sliding your longboard is to make sure you have the right board. When you’re just starting, it’s best to use a specifically designed board for sliding. These boards are usually shorter and have softer wheels, making them easier to control. Then, once you’ve mastered the basics of sliding, you can experiment with different boards to find the one that best suits your style.

Sliding Your Longboard

Step 2: Get in Position

Once you have your longboard, it’s time to get in position. You’ll want to be in a low, crouched stance with your feet close together and your weight evenly distributed. Your back foot should be positioned slightly higher on the board’s tail, while your front foot should be placed near the middle of the deck.

Step 3: Start Pushing

Now it’s time to start pushing! Begin by rolling forward at a moderate speed, and then start pushing with your back foot. As you gain speed, begin to lean back and transfer your weight to the board’s tail. This will help to create instability and make it easier to slide.

Step 4: Initiate the Slide

Once you’re moving fast enough and have your weight over the board’s tail, it’s time to initiate the slide. You can nudge the board with your back foot or by sharply lifting your front foot and then quickly placing it back down.

Some people like to use their front foot to help initiate the slide, but be careful not to put too much pressure on the nose of the board, or you’ll risk flipping over.

Step 5: Lean Into the Slide

Once you’ve initiated the slide, it’s important to lean into it. This will help you keep your balance and control the speed of the slide. For example, if you’re sliding down a hill, be sure to lean back slightly to don’t go too fast. You can also adjust your speed by how much you lean into the slide.

Step 6: Stay Loose

Once you’ve initiated the slide and are leaning into it, staying loose is important. This means keeping your arms and legs relaxed and not gripping the board too tightly. It will be difficult to make adjustments and keep your balance if you’re tense. So relax and enjoy the ride!

Step 7: End the Slide

When you’re ready to end the slide, push off with your back foot to stop the board. Congratulations, you’ve just completed a basic longboard slide! Now get out there and practice to perfect your technique. Remember always to stay safe while skating and to wear the proper safety gear, including a helmet, elbow and knee pads, and wrist guards. Happy sliding!

Basic Longboard Slide

Now that you know how to slide longboard, try it out there! Just remember to take things slowly and practice in a safe area. With a little bit of practice, you’ll be sliding like a pro in no time. Stay safe and have fun!

How Do You Practice Sliding on A Longboard?

Sliding is one of the most exhilarating aspects of longboarding, but it can also be dangerous. When done improperly, sliding can result in serious injuries. That’s why it’s important to practice sliding in a safe and controlled environment before taking your skills to the streets.

The first step is to find a suitable location. A grassy hill with a long, gradual slope is ideal. Once you’ve found a good spot, it’s time to get your board set up. You’ll want to lower your trucks as much as possible and turn them until they’re nearly perpendicular to the deck. This will make your board more unstable and easier to slide.

Next, apply some speed wax to the bottom of your skating footwear. This will help you keep your footing on the slippery surface of the deck. Finally, take a few practice runs, starting with small slides and gradually working up to bigger ones.

Remember to keep your weight centered over the deck, and don’t try to stop too suddenly. With practice, you’ll be sliding like a pro in no time!

How Do You Slide Stop on A Longboard?

Ender uses their back foot to slow the longboard down by dragging it along the ground. The amount of pressure that the rider applies with their foot will determine how quickly the longboard slows down. To slide stop, the rider first needs to find a smooth patch of pavement.

They then need to approach the area at a moderate speed and place their back foot on the ground. The rider should then apply pressure to the back foot while keeping their front foot planted on the longboard’s deck. As the longboard begins to slow down, the rider should start to lean back, which will help to keep them balanced.

Riders Will Be  Able to Slide Stop

With practice, riders will be able to slide stop with ease and use it to control their speed when going downhill. Keep reading for more information about how to slide longboard.

Frequently Asked Question

Is It Hard to Slide on A Longboard?

It is not hard to slide on a longboard as long as you wear the appropriate safety gear, have ample space to maneuver, and know how to execute a slide properly.

Can You Slide Any Longboard?

The answer is yes! Any longboard can be used for sliding, provided it has the necessary grip, and you have the right technique. But, of course, you’ll also need to make sure your wheels are in good condition and aren’t too worn down – otherwise, you’ll find it difficult to control your slide.

How Do You Slow Down on A Longboard?

There are a few ways to slow down on a longboard. For example, you can use your foot to the brake or apply pressure to the side of the board to make it skid. You can also use techniques like the speed check or the powerslide to slow down gradually.

Do You Need Special Wheels to Slide on A Longboard?

No, you don’t need special wheels to slide on a longboard. Any good quality skateboard wheel will do the trick. Just make sure they’re not too slippery and that you have enough speed before you attempt to slide.

What Is Longboard Best for Sliding?

If you’re starting, a longboard that is easy to control is the best option. For example, the Quest Super Cruiser 44-inch is a great choice for beginners. It has a nice, wide deck that makes it easy to balance and control. Plus, the Super Cruiser has a smooth ride that makes it perfect for sliding.

Longboard Is Easy to Control

Do I Need Slide Gloves?

No, you don’t need slide gloves to slide longboard; however, they can help you stay in control while sliding. Slide gloves help keep your hands from slipping off the board, and they also provide some protection if you fall. If you don’t have slide gloves, you can use regular gloves or just your hands.


Sliding on a longboard is all about balance, control, and speed. It would help if you used your body weight to control the board and find the right speed for you. Master these techniques, and you’ll be sliding down hills like a pro! Thanks for reading our post about how to slide longboard.