How to Tell if Your Snowboard Needs Waxing

How do you know if your snowboard needs waxing? It is important to know how to tell if your snowboard needs waxing. It’s not always easy to tell, but there are a few signs that can help. In this post, we’ll go over the basics of waxing and how to tell if it’s time for a new coat. 

We’ll also recommend some tips for keeping your board in good condition all season long. So whether you’re a beginner or an expert rider, read on for everything you need to know about waxing your snowboard!

Materials You Will Need

  • A waxing iron
  • Wax of your choice (make sure it’s designed for snowboarding)
  • Scraper
  • Clean cloth or paper towel

The Benefits of Waxing Your Snowboard

1. Waxing Protects Your Snowboard From the Elements

Waxing your snowboard helps to protect it from the sun, wind, and rain. Without wax, your snowboard can become dry and brittle, which can cause it to break or crack. Wax also helps to prevent rust and corrosion, which can damage your snowboard over time.

2. Waxing Makes Your Snowboard More Slippery

Wax helps to make your snowboard more slippery, which can help you go faster and perform better. If you are a competitive snowboarder, waxing your board is essential in order to give you the best possible chance of winning.

Wax Helps to Make Your Snowboard More Slippery

3. Waxing Gives You Better Control Over Your Snowboard

Waxing your snowboard gives you better control over it, as it makes the surface more slippery. This can be helpful if you are trying to land a trick or navigate through difficult terrain.

4. Waxing Makes Your Snowboard Easier to Clean

Waxing your snowboard makes it easier to clean, as it prevents dirt and grime from sticking to the surface. If you don’t wax your board, you’ll likely find that it’s much harder to keep clean.

5. Waxing Makes Your Snowboard Last Longer

Waxing your snowboard helps to extend its lifespan by protecting it from the elements and preventing wear and tear. If you take care of your board, it will last longer and perform better over time.

6. Waxing is Relatively Inexpensive

Compared to other forms of maintenance for your snowboard, waxing is relatively inexpensive. You can buy a good quality wax for around $20, which will last you several seasons.

Maintenance for Your Snowboard

7. Waxing is Easy to Do Yourself

You don’t need to take your snowboard to a shop to get it waxed – you can easily do it yourself at home with a few simple tools. If you’re not sure how to wax your board, there are plenty of online tutorials and videos that can help walk you through the process step-by-step.

8 Steps Guide on How to Tell if Your Snowboard Needs Waxing

Step 1: Feel the Base of Your Snowboard

One of the most important things to remember when snowboarding is to keep your weight evenly distributed on your board. This can be easier said than done when you’re first starting, but it’s important to focus on shifting your weight from your front foot to your back foot and vice versa. 

A good way to do this is to feel the base of your snowboard with your feet. As you shift your weight, you should be able to feel the edges of your board digging into the snow. This will help you stay balanced and avoid making unexpected turns. With a little practice, you’ll be able to keep your weight evenly distributed and enjoy a safe and fun ride down the slopes.

Step 2: Check the Edges of Your Snowboard

Before hitting the slopes, it’s important to check the edges of your snowboard. Sharper edges will help you carve turns more effectively, but if they’re too sharp they can catch on ice and cause you to fall. The best way to check your edges is with a stone grinder. 

Sharper Edges Will Help You Carve Turns

Hold the snowboard up to the light to find any nicks or burrs. Then, use the stone grinder to carefully remove them. The goal is to create a smooth, even edge that will help you glide across the snow with ease. With just a few minutes of preparation, you can ensure that your snowboard is ready for a day on the slopes.

Step 3: Check the Color of Your Snowboard’s Base

If you’re a snowboarder, chances are you’ve got a quiver of boards that you rotate through depending on the conditions. Rocker boards for powder, camber for groomers, and so on. But there’s one thing that all those boards have in common: the color of their bases. Why does it matter? Well, for one thing, it can affect how fast your board is. A darker base will absorb more heat from the sun, making the snow softer and slower. 

Conversely, a lighter base will reflect more heat, keeping the snow colder and faster. So if you’re shredding on a bluebird day, you might want to go with a lighter board. But if you’re braving fresh pow, a darker board will help you stay afloat. Either way, it’s good to know how the color of your base can affect your ride.

Step 4: Check for Water Spots

While enjoying a day on the slopes, the last thing you want to worry about is your snowboard. It’s important to keep your board in good condition so that you can focus on having fun. One way to do that is to check for water spots before you hit the slopes. Water spots can occur when your board comes into contact with melting snow or ice. 

Spots Can Weaken the Structure

These spots can weaken the structure of your board and make it more susceptible to damage. To check for water spots, simply hold your board up to the light and look for any areas that appear dull or discolored. If you find any spots, be sure to wipe them off with a soft cloth before heading out for a day of shredding.

Step 5: Check the Speed of Your Snowboard

Checking your speed is important when snowboarding. If you’re going too fast, you could lose control and fall. If you’re going too slow, you might not be able to make it up the hill. There are a few ways to check your speed. One way is to use a stopwatch. 

Start the stopwatch when you start snowboarding and stop it when you reach the bottom of the hill. The amount of time it takes you to get down the hill will give you an idea of how fast you were going. Another way to check your speed is to use a speedometer. If you have a GPS, you can also track your speed that way. Whichever method you use, checking your speed is a good way to make sure you’re snowboarding safely.

Step 6:  Listen for Any Strange Noises

If you can hear any strange scratching or squeaking noises when you ride your snowboard, then it might need waxing. These sounds are usually caused by friction between the base of the board and the snow, which can be reduced with a fresh coat of wax.

Step 7: Check Your Board After Every Ride

It’s a good idea to check your board after every ride to make sure that it still has plenty of wax. If you’ve been riding in wet or icy conditions, then the wax may have worn away more quickly and require reapplication sooner. Proper checking and maintenance will help keep your board in tip-top condition for years to come.

It's a Good Idea to
Check Your Board

Step 8: Wax Your Snowboard Regularly

The best way to keep your snowboard performing at its peak is to wax it regularly. How often you should wax it will depend on how much you ride and the conditions that you’re riding in, but a good rule of thumb is to wax your board every month or two. This will help to keep it in top shape and ensure that you get the most out of your rides.

Additional Tips

1. Avoid using old wax on your snowboard – it won’t do much good and can damage the board.

2. Use a high-quality wax specifically designed for snowboards to get the best performance out of your board.

3. If you’re not sure how to wax properly, seek advice from an experienced snowboarder or take your board to a shop.

4. Don’t forget to scrape off the old wax before applying a new coat – this will ensure that the wax bonds properly with the base of the board.

5. Make sure to use a soft cloth or sponge when applying and removing wax from your snowboard to avoid damaging the surface.

By taking the time to wax your snowboard properly and regularly, you’ll be able to get the maximum performance out of it and enjoy more successful rides. 

How Do You Apply Wax to a Snowboard?

Applying wax to a snowboard is important for two reasons: it helps the board glide better and prevents it from drying out. The best time to wax your board is when the temperature is between 20 and 60 degrees Fahrenheit. If it’s too cold, the wax will be difficult to spread; if it’s too hot, the wax will melt and become difficult to remove. 

Applying Wax to a
Snowboard is Important

When applying wax, first make sure the board is clean and dry. Then hold the wax against the snowboard and rub it back and forth until it’s evenly distributed. Next, use a hair dryer or heat gun to melt the wax into the board. Finally, use a brush or paper towel to buff the area until it’s smooth. By following these simple steps, you can keep your snowboard in top condition all season long.

How Do You Remove Wax From a Snowboard?

You don’t have to be a professional snowboarder to know that a good wax job is the key to a smooth ride. But what happens when your board starts to build up too much wax? The good news is that it’s relatively easy to remove excess wax from your snowboard at home. 

All you need is a hairdryer, some rubbing alcohol, and a clean cloth. First, heat the wax with the hairdryer until it’s soft. Then, gently rub the alcohol onto the wax with the cloth until it starts to loosen. Finally, wipe away the wax with a clean towel. With just a few simple steps, you can keep your snowboard in top condition all season long!

What Is Hot Waxing a Snowboard?

For anyone who’s ever been on a snowboard, you know that one of the most important things is to keep your board fast. One way to do this is through hot waxing. Hot waxing a snowboard involves using a specially formulated wax that’s applied to the board with a hot iron. The heat helps to melt the wax into the board, creating a smooth and fast surface. 

Hot waxing should be done regularly, and it’s especially important if you’re going to be riding in icy conditions. Not only will it help keep your board fast, but it will also help to protect the base from wear and tear. So if you’re looking to get the most out of your snowboarding experience, be sure to give hot waxing a try.


Snowboarding is a fun winter activity that anyone can enjoy. If you take good care of your snowboard, it will last for many years. A crucial part of maintaining your snowboard is regularly waxing it. You should determine carefully how to tell if your snowboard needs waxing. You should Wax Your board every 3-5 times you use it, or once per month if you are an avid Snowboarder. 

You can tell if your board needs Waxing if the bottom feels Dry or Slippery, if there is rust on the Metal Edges, or if the Base appears to be losing color. Following these simple tips will help you prolong the life of your snowboard and ensure that you have a great time out on the slopes!