How to Use Skate Tool

It is essential to have the right tools to help you skate. One of the critical tools is a skate tool. A skate tool can help you adjust your trucks and bearings, making skating much easier. In this article, we will explain how to use skate tool. We will also provide tips for choosing the right skate tool for your needs. So, whether you are a beginner or an experienced skater, read on to learn more about using a skate tool!

Learning skate tools can be easy as long as you know what kind of tools come with the pack. The best way to learn about the tools is to take them out and look at them.

How to Use Skate Tool

A Step by Step Guide on How to Use Skate Tool

Tool 1: The Wrench

This is the essential tool in your skate toolset. This will be used for tightening and loosening nuts on your board. First, fit it into the nut, then turn it clockwise or counter-clockwise (depending on which direction you want to tighten) until tight. For beginners, it may be difficult because you need to apply force with your body weight. Please make sure not to over-tighten the nuts, as doing so can damage them. If the nut moves, do a quarter-turn of both screws until fixed. After using this tool multiple times, you will get familiar with how much strength is needed.

Tool 2: The Spinner Bolt Tool

This tool is a one-step process for tightening and loosening your spinner bolt. You do it by inserting the “teeth” on the top of the tool to insert into the hole of your spinner bolt. Once inserted, twist it clockwise or counter-clockwise until tight. Ensure not to over-tighten as doing so comes with consequences such as damaging your bearings. If the spinners move, do a quarter turn on both screws until fixed. After using this tool multiple times, you will get familiar with how much strength is needed.

Tool 3: The Screwdriver (Flathead)

This screwdriver has two different ends; one is a flathead, and the other is a Phillips head. Place it into the screw, then twist it clockwise or counter-clockwise depending on which direction you want to tighten/loosen. Make sure not to over-tighten as doing so comes with consequences such as damaging your deck. If it doesn’t move, do a quarter-turn of both screws until fixed. After using this tool multiple times, you will get familiar with how much strength is needed.

Tool 4: The Screwdriver (Phillips)

This screwdriver has two different ends; one is a flathead, and the other is Phillip’s head. You use this by placing it into the screw and then twisting either direction as you wish. Make sure not to over-tighten as doing so comes with consequences such as damaging your board. If it doesn’t move, do a quarter-turn of both screws until fixed. After using this tool multiple times, you will get familiar with how much strength is needed.

Tool 5: The Allen Wrench

This specific tool has two different sized ends; a 3mm and a 4mm tip used for the bolts on your trucks. How you use this is by inserting one end into the bolt then twisting clockwise or counter-clockwise depending on which way you want to tighten/loosen the nut under the metal plate of your trucks. Make sure not to over-tighten as doing so comes with consequences such as damaging your board. If it doesn’t move, do a quarter bolt turn until fixed. After using this tool multiple times, you will get familiar with how much strength is needed.

Different Size of Allen Wrench

Tool 6: The Ruler

The ruler is used for measuring the length of your skateboard. You use this by placing one end on top of your board, then aligning it to either wheel, then reading off the measurement at the bottom tip of where you placed it. This is done so that when you decide on what wheels to put onto your deck, they are perfectly aligned for balancing purposes and performance reasons (ex: more contact patch).

Tool 7: The Bearing Press

This tool is used for putting in/taking out your bearings. You use this by aligning the “wing” on top of the bearing to match with the two outer holes on the skate tool, then place it between your knees before using your hands to push down on it. How hard you press on how large or small your bearing is. For more oversized bearings, put more strength into your push until fixed in its hole. How easy it can be taken out depends on how much force you placed when pressing it into its hole, so make sure not to over-tighten it, or else damage will ensue.

If they are being removed, unscrew them gently until they fall out completely. Make sure never to lose any of the balls! How you get them back in is by placing a few on top of the bearing, then tapping it into its hole with a screwdriver, or simply pushing it in by hand. How tightly you place it depends on how large/miniature your bearings are, so make sure not to over-tighten. The use of this tool is crucial in how to use skate tool.

Tool 8: The Allen Wrench (Penny Style)

This tool has two different sized ends; a 3mm and a 4mm tip will be used for the bolts on your trucks. How you use this is by inserting one end into the bolt then twisting clockwise or counter-clockwise depending on which way you want to tighten/loosen the nut under the metal plate of your trucks. How you place pressure on this tool is similar to Phillip’s head screwdriver. How hard you push on how large or small your bearing is and how much force you used when pressing it into its hole, so make sure not to over-tighten it, or else damage will ensue.

If they are being removed, unscrew them gently until they fall out completely. Make sure never to lose any of the balls! You get them back in by placing a few balls onto the bolt, then tapping it back into its hole with a screwdriver or simply pushing it in by hand. Again, how tightly you place it depends on how large/miniature your bearings are, so make sure not to over-tighten.

Tool 9: The Shank

The shank is used for removing small bolts. You use this by inserting the smaller end into the bolt then twisting clockwise until fixed. How hard you push on how large or small your bearing is and how much force you used when pressing it into its hole, so make sure not to over-tighten it, or else damage will ensue. If they are being removed, unscrew them gently until they fall out completely.

 Removing Small Bolts

Make sure never to lose any of the bearings! You get them back in by placing a few on top of the bolt, then tapping it back into its hole with an Allen wrench or simply pushing it in by hand. Again, how tightly you place it depends on how small/large your bearings are, so make sure not to over-tighten. The use of this tool will help in how to use skate tool.

You Can Check It Out to Use Bones Speed Cream

Why You Need a Skate Tool?

Your skates are an investment. So once you purchase them, it’s essential to take care of them the best that you can to ensure that they last as long as possible. A Skate Tool can help to do that by keeping your skate hardware tight and screws in place.

A skate tool is typically used only for tightening or loosening specific kinds of screw heads on inline/roller skates. How tightly you need to fasten your screws depends on the quality of the boot, but if you are replacing parts or if something has come loose or broken, use a skate tool first before considering other options like super glue or epoxy that you don’t damage anything further. Skate tools should only be used for their intended purpose and can be bought at most skates stores or online.

Used of Skate Tool

If you find that your bearings are becoming too loose, try tightening them using the method in the video below. The best way is to place your skates on a flat surface or table so that they don’t roll around when you’re working on them. If there are any bearing caps (the small screws located at either end of the bearing), remove these first by turning them counter-clockwise.

Please do not turn the clockwise as this will undo the bearing and make it too tight. Once you’ve removed them completely, you can use your Skate Tool to re-tighten the directions, ensuring they are secure before replacing the caps by turning clockwise.

Conclusion

We hope now you know how to use skate tool. The Skate Tool is a simple yet powerful tool that can be used to help your customers get the most out of their shopping experience. By adding the right product features and benefits to your website, you’ll see increased conversion rates and a higher average selling price. This Skate Tools saves your shoppers time and makes for a better experience for them, which means they are more likely to come back.

You may also read: How to Skate Off a Curb

Leave a Comment