Best Skateboard Risers: Smoother Rides, No Wheelbite

The best skateboard risers stop wheelbite, cut road buzz, and fit your trucks.

You land a clean carve and hear that awful scrape. Wheelbite. Or you ride rough pavement and your feet buzz for hours. The right risers fix both. They add clearance, soak up chatter, and help your setup feel dialed. I’ve tested many options across street, park, and longboard builds. Below, I break down the best skateboard risers for smooth rides and safe turns, from thin shock pads to tall lifts and wedges for truck tuning.

See the differences between my top picks at a glance.

Independent 1/4 Riser + 1-1/4 Hardware Kit

This Independent kit makes life easy. You get a matched 1/4-inch riser and 1-1/4-inch Phillips hardware in one pack. The fit is clean, the holes line up, and it works with most standard trucks. If you want a quick cure for wheelbite and a simple install, this is it.

I like this for street and park boards that run 54–56 mm wheels. The riser adds safe clearance without feeling too tall. The hard material keeps your pop crisp. Setup time is short since you have the right bolt length in the bag.

Pros:

• All-in-one kit saves time and guesswork
• True 1/4-inch lift helps stop wheelbite
• Clean fit with standard baseplates
• Stiff riser keeps board feel and pop
• Trusted Independent quality and consistency

Cons:

• Hard riser does not absorb much vibration
• Costs more than no-name kits
• Fixed height only, no wedge option

What Amazon Buyers Are Saying

Shoppers often praise the matched hardware length and easy install. Many note solid fit and finish. Some mention the riser is stiff, which is great for pop but not for comfort. A few buyers remind others to re-check nut tightness after the first ride.

My Recommendation

This is my top pick if you want reliable clearance with no guesswork. It is worth it for most street and park setups. Overall rating: 4.7/5.

Category	Rating
Wheelbite Prevention	4.8/5
Ease of Install	5/5
Board Feel	4.6/5
Durability	4.7/5
Value	4.4/5
Overall Rating	4.7/5

VJ 1/4 Riser Pads + 1.25in Hardware (Black)

These VJ 1/4-inch risers include 1.25-inch screws, so you can bolt up right away. The rubber build helps cut high-frequency road buzz. That makes commutes and long cruises feel better underfoot. The holes are standard, and install is quick.

I like these for cruiser boards and longboards with 60 mm wheels or smaller. The rubber adds comfort without feeling mushy. The price is strong for a kit with hardware. If you want the best skateboard risers for comfort on rough roads, this is a smart value pick.

Pros:

• Includes 1.25-inch hardware for a proper fit
• Rubber material reduces vibration
• Good lift for most wheelbite issues
• Fair price for a full kit
• Works with many truck brands

Cons:

• Rubber can compress a bit over time
• Less crisp pop than hard plastic risers
• Only one thickness option in this kit

What Amazon Buyers Are Saying

Many buyers like the smooth ride and simple install with included screws. Some highlight improved comfort on rough paths. A few say to re-check hardware tightness as rubber settles. Rare comments mention bolt length mismatch on non-standard decks.

My Recommendation

Great value if you want comfort and clearance in one box. It shines for cruisers and campus boards. Overall rating: 4.6/5.

Category	Rating
Vibration Damping	4.7/5
Wheelbite Prevention	4.6/5
Install & Fitment	4.6/5
Durability	4.3/5
Value	4.8/5
Overall Rating	4.6/5

Outus 3mm Shock Pads, 10-Pack

This 10-pack of thin pads is about comfort and noise control. At 3 mm, they add very little height. That keeps your pop and balance close to stock. The soft material helps mute chatter from cracks and old asphalt.

They also work as “gasket” spacers if your baseplate squeaks. Stack two if you want a touch more cushion. They do not come with hardware, so plan your bolt length. For skaters who want the best skateboard risers with minimal lift, these shine.

Pros:

• Large 10-pack for multiple boards
• Very low lift keeps board feel
• Soft pads reduce rattle and buzz
• Easy to trim if needed
• Great value per pad

Cons:

• No hardware included
• Not enough lift for big wheels
• Soft pads may compress over time

What Amazon Buyers Are Saying

Customers often praise the value and how these reduce vibration at low cost. Some stack them for a custom feel. A few note the thin material can deform if overtightened. Most say they are easy to install.

My Recommendation

Ideal if you want shock pads, not tall risers. Use them to smooth rides without changing geometry. Overall rating: 4.4/5.

Category	Rating
Vibration Damping	4.3/5
Height vs. Board Feel	4.8/5
Ease of Install	4.6/5
Durability	3.9/5
Value	4.9/5
Overall Rating	4.4/5

VJ 1/2 Riser Pads + 1.5in Hardware (Black)

Need a big lift? These 1/2-inch VJ risers give major clearance. They include 1.5-inch hardware, so you are covered. Rubber adds comfort on long rides. They work well for 63–70 mm wheels on cruisers and some longboards.

On trick boards, 1/2 inch will feel tall. That can slow flip tricks. But for wheelbite problems, it is a real fix. If you need the best skateboard risers for big wheels on a budget, start here.

Pros:

• Serious lift for big wheels and tight turns
• Hardware included for a complete setup
• Comfortable rubber feel on rough roads
• Affordable for the size
• Works for cruisers, film boards, and cameras on deck

Cons:

• May feel too tall for street tricks
• Rubber can compress slightly
• Heavier than thin risers

What Amazon Buyers Are Saying

Owners often report a clear fix for wheelbite on cruisers. Many like the included bolts. Some mention a more “surf” feel due to the taller stack. A few note you must check kingpin clearance for very low trucks.

My Recommendation

Pick this if you run big soft wheels on a standard deck. It gives clearance and comfort at a fair price. Overall rating: 4.5/5.

Category	Rating
Wheelbite Prevention	5/5
Vibration Damping	4.5/5
Install & Hardware	4.7/5
Board Control (Tricks)	3.8/5
Value	4.6/5
Overall Rating	4.5/5

Independent Genuine Parts 1/8 Risers

These classic 1/8-inch risers are a small lift for a subtle change. They help with tiny rubs and give a touch of clearance for 53–55 mm wheels. The hard plastic keeps your deck feel sharp. They are thin, light, and simple.

If you want the least change to your geometry, start here. You will likely not need longer hardware. These are great for street boards where you want fast pop and only a little extra space. A staple in many toolboxes.

Pros:

• Minimal height change maintains pop
• Easy install; often works with stock bolts
• Consistent shape and fitment
• Trusted brand in trucks and parts
• Great for micro wheelbite fixes

Cons:

• No hardware included
• Hard plastic does not dampen vibrations
• Too thin for big wheels

What Amazon Buyers Are Saying

Skaters like the thin profile and brand reliability. Many use them to solve minor rubs. A few note they do not soften the ride. Fitment on standard baseplates is commonly reported as good.

My Recommendation

The best skateboard risers when you want “almost stock” feel. I suggest these for small tweaks. Overall rating: 4.5/5.

Category	Rating
Subtle Geometry Change	4.9/5
Wheelbite Relief	4.0/5
Board Feel	4.8/5
Durability	4.7/5
Value	4.2/5
Overall Rating	4.5/5

VJ 14mm Risers + 1.75in Hardware (Black)

These are for skaters who want max clearance. At 14 mm, you get serious space for big soft wheels. The set includes 1.75-inch screws for a correct bite. Rubber material helps soften the ride on rough streets.

Great for longboards, surf skates, and filming setups with riser cameras or mounts. They make tight turns with less bite. Be ready for a higher center of gravity. For those who need the best skateboard risers at max height, this is a solid value.

Pros:

• Massive clearance for large wheels
• Comes with proper-length bolts
• Rubber helps absorb shock
• Good budget option at this height
• Simple, universal pattern

Cons:

• Very tall for technical street tricks
• Rubber may settle slightly
• Heavier setup feel

What Amazon Buyers Are Saying

Owners often note wheelbite is gone even with large wheels. Many like the smoother ride. Some report needing to tweak bushing tightness due to the taller stack. A few mention the bolts are long, so use washers.

My Recommendation

Use these when nothing else stops wheelbite. Perfect for big-wheel cruisers and longboards. Overall rating: 4.5/5.

Category	Rating
Wheelbite Prevention	5/5
Comfort	4.6/5
Ease of Install	4.6/5
Stability (at speed)	4.2/5
Value	4.7/5
Overall Rating	4.5/5

vanpro 1/8 (4mm) Rubber Risers, 4-Pack

This 4-pack gives you two setups or spares. The 4 mm height is a nice middle ground between 1/8 and 1/4. Rubber reduces vibration without making your board feel soggy. It is a smart upgrade for rough city streets.

They do not include bolts, so check length. Most stock 1-inch bolts can still work at 4 mm, but measure your deck. For skaters wanting the best skateboard risers for comfort with light lift, these are a deal.

Pros:

• Four pads cover two boards or backups
• Comfortable rubber for daily rides
• Moderate lift helps with small bites
• Good value price
• Easy to install and align

Cons:

• No hardware included
• May compress if over-tightened
• Not for very large wheels

What Amazon Buyers Are Saying

Buyers tend to like the smooth ride and fair price. Many note a better feel on cracked sidewalks. Some suggest checking bolt length on thicker decks. A few mention the pads may have a light rubber smell at first.

My Recommendation

Grab these if you want more comfort with near-stock height. They are great for commuters. Overall rating: 4.4/5.

Category	Rating
Vibration Damping	4.4/5
Wheelbite Prevention	4.1/5
Ease of Use	4.7/5
Durability	4.2/5
Value	4.7/5
Overall Rating	4.4/5

vanpro 1/4 (6mm) Rubber Risers, 4-Pack

These 1/4-inch rubber risers balance clearance and comfort. You get four pads for two boards. They help curb wheelbite with 56–60 mm wheels and soften cracks. The rubber compound feels sure underfoot.

You will likely need 1.25-inch hardware, so plan ahead. They fit most standard trucks and baseplates. If you want the best skateboard risers with value and versatility, this 4-pack is a strong pick.

Pros:

• Four pads for multi-board setups
• Good clearance without feeling too tall
• Noticeable comfort on rough roads
• Fits many truck brands
• Value pricing for a 4-pack

Cons:

• Hardware not included
• Rubber may compress slightly over months
• Not as crisp as hard risers for big pop

What Amazon Buyers Are Saying

Common praise includes less chatter and fewer bites. Users like the price for a two-board set. Some warn to get the right bolt length. A few mention needing to re-tighten after initial settling.

My Recommendation

Solid all-around 1/4-inch riser with comfort built in. Ideal for cruisers and daily riders. Overall rating: 4.5/5.

Category	Rating
Comfort	4.6/5
Clearance	4.6/5
Fitment	4.5/5
Longevity	4.2/5
Value	4.7/5
Overall Rating	4.5/5

PIG Piles 1/8 Shock Pads (Red)

These classic red shock pads from Pig add style and comfort. At 1/8 inch, they keep your setup close to stock height. The material helps reduce noise and small vibrations. They’re great if you want a smoother feel with a pop of color.

They do not include bolts, but many boards can use stock hardware at this height. I like them for street boards on old asphalt. They are a nice way to refine your ride without overhauling it. A clean, simple upgrade.

Pros:

• Red color adds a custom touch
• Soft material reduces buzz
• Low profile keeps pop
• Simple, proven design
• Good for daily rides on rough streets

Cons:

• No hardware included
• Limited lift for larger wheels
• Color may show dirt over time

What Amazon Buyers Are Saying

Many mention a smoother ride and the fun red look. Some highlight easy install and standard hole pattern. A few remind others to avoid overtightening soft pads. Reports often note better comfort without big height change.

My Recommendation

Choose these if you want shock pads with style. They balance comfort and board feel well. Overall rating: 4.5/5.

Category	Rating
Vibration Damping	4.5/5
Height vs. Pop	4.7/5
Fitment	4.6/5
Aesthetics	4.8/5
Value	4.4/5
Overall Rating	4.5/5

VJ Angle Wedge Riser Pads (Black)

Wedge risers change your truck angle to tune turn and stability. Mount the thick side to the toe to add turn, or the other way to add stability. These rubber wedges are great for surf skates and longboards. They also add a bit of lift.

They do not come with bolts, so plan for longer hardware. Use wedges to balance front and rear turn for your style. If you want the best skateboard risers for fine-tuning feel, wedges are a must. They are a simple and powerful tuning tool.

Pros:

• Let you tune truck angle and feel
• Rubber helps reduce vibration
• Useful on front-only or rear-only for balance
• Works on longboards, surf skates, and cruisers
• Affordable way to change ride

Cons:

• No hardware included
• Requires testing to find your angle
• May alter wheelbase slightly

What Amazon Buyers Are Saying

Riders like the control over turn and dive. Many note better carving or added stability based on placement. Some say there is a learning curve. Others suggest starting with a small wedge under the front truck.

My Recommendation

Get these if you want to dial your carve or stability without new trucks. They are a smart tuning move. Overall rating: 4.6/5.

Category	Rating
Tuning Capability	5/5
Ride Comfort	4.4/5
Ease of Setup	4.2/5
Versatility	4.8/5
Value	4.7/5
Overall Rating	4.6/5

How to Choose the Best Skateboard Risers

Picking the best skateboard risers comes down to your wheels, terrain, and style. Use these tips to match height, material, and hardware. Keep it simple and test small changes first.

1. Match Height to Wheel Size and Terrain

Use 1/8-inch to 1/4-inch for 53–58 mm wheels and light wheelbite. Go 3–6 mm shock pads if you want comfort with little lift. Choose 1/2-inch or 14 mm for 60–70 mm cruiser wheels. Ride rough streets? Add a thin shock pad for comfort even if you do not need height.

2. Pick Material and Type for Feel

Hard plastic risers keep pop and response. Rubber risers and shock pads cut road buzz and help comfort. Wedge risers change truck angle. Put a wedge under the front for more carve. Put it under the rear for more stability. Flat risers only add height; wedges tune feel and height together.

3. Check Hardware Length and Fit

Stock hardware is often 1 inch. Add 1/8-inch pad? You may still be fine. Add 1/4-inch? Use 1.25-inch bolts. Add 1/2-inch? Use 1.5-inch bolts. Thick decks or shock pad stacks may need longer. Align holes carefully to avoid cross-threading. Re-tighten after your first ride as rubber settles.

Final Verdict: Which Should You Buy?

If you want the best all-around pick, go with Independent 1/4 Riser + 1-1/4 Hardware Kit. It stops wheelbite, installs fast, and keeps a crisp feel.

Need comfort first? Choose VJ 1/4 Rubber or Pig Piles shock pads. Each helps you find the best skateboard risers for your style and streets.

FAQs Of best skateboard risers

Do skateboard risers really help with wheelbite?

Yes. Even a 1/8-inch pad can stop minor rubs. A 1/4-inch riser fixes most wheelbite on street setups.

What hardware length do I need with risers?

Add about the riser height to your stock bolts. 1/4-inch risers usually need 1.25-inch hardware. 1/2-inch needs 1.5-inch.

Are rubber or plastic risers better?

Plastic keeps pop sharp. Rubber reduces vibration and feels smoother. Choose plastic for tricks, rubber for comfort.

What size risers for 60 mm wheels?

Start with 1/4 inch. If you still get bite, go to 1/2 inch. Check deck wheel wells and truck tightness too.

What do wedge risers do?

Wedge risers change truck angle. More angle adds turn. Less angle adds stability. They also add a bit of height.

Do risers affect pop and flip tricks?

Taller risers raise your center of gravity. That can slow flips. Thin pads or plastic risers keep pop closer to stock.

Can I stack shock pads?

Yes, but keep it small. Stacking two thin pads is fine. Check hardware length and re-tighten after settling.