Best Screws For Skateboard: Size, Length & Fit Guide

The best screws for skateboard are 1"–1.25" Phillips or Allen hardware with durable steel and lock nuts.

You land a hard kickflip. Your trucks shift. A bolt head rounds out. Now the board squeaks, and your confidence drops. I’ve been there. The right skateboard screws fix this fast. Good hardware holds your trucks firm, resists rust, and stays tight. The wrong set strips, loosens, or snaps at the worst time. I tested and compared popular kits so you can buy once and ride stress-free. Below, I break down the best screws for skateboard setups, from stainless Allen sets to budget kits with tools.

See the differences between my top picks at a glance.

Longboard Cruiser Hardware Screws (Black 1.25″)

This set targets longboard and cruiser riders who use risers or thicker decks. The 1.25-inch length gives you extra thread engagement. That helps keep trucks tight when rolling over cracks and rough pavement. Hardware color is black for a clean, stealth look.

The listing offers several sizes from 1 inch up to 2 inches. That makes it easy to match hardware to your riser height. The kit is basic and avoids fluff. It focuses on getting your trucks mounted with enough bite to stay solid.

Pros:

• 1.25-inch length suits risers and thicker decks
• Multiple size options in the same listing
• Neutral black finish matches most builds
• Good for cruisers and longboards
• Simple, no-fuss kit for quick installs

Cons:

• Head/drive type not specified
• Material and nut type not detailed
• No included tools or washers

What Amazon Buyers Are Saying

Customers who choose longer hardware often point out that extra length helps when using risers. Many look for clean finishes and consistent threading. Some note they prefer to see head type and nut style listed clearly. Check the most recent reviews for specifics on fit and completeness.

My Recommendation

I like this for cruisers with 1/8–1/4 inch risers. It keeps trucks locked in without bottoming out. It is a simple buy if you know your needed length. Overall rating: 4.2/5.

Category	Rating
Strength	4.2/5
Corrosion Resistance	4.0/5
Ease of Install	4.3/5
Completeness	3.8/5
Value	4.4/5
Overall Rating	4.2/5

PATIKIL 1-1/4″ Carbon Steel Grade 8.8 Kit

This PATIKIL set uses carbon steel rated Grade 8.8. That is a strong spec for skateboard hardware. The 1.25-inch length works with thin risers or thicker decks. Black finish keeps the look tight.

If you land big drops or ride rough streets, strength matters. This set aims to resist bending and snapping better than soft hardware. It comes with bolts and nuts for a full truck mount. Pair it with quality bushings and you will feel a tighter ride.

Pros:

• Grade 8.8 carbon steel for higher strength
• 1.25-inch length suits risers
• Includes nuts for a full mount
• All-black look for stealth builds
• Good option for heavier riders

Cons:

• Head/drive type not specified
• No extra tools included
• May be overkill for light street setups

What Amazon Buyers Are Saying

Shoppers who look for Grade 8.8 hardware tend to care about longevity. Reviews for similar sets praise strong threads and reliable nuts. Some buyers wish for clear head type details and size charts. Read current reviews to confirm fit and packaging.

My Recommendation

Choose this if you want robust hardware and run small risers. It is a smart buy for commuting longboards too. Overall rating: 4.4/5.

Category	Rating
Strength	4.7/5
Corrosion Resistance	4.1/5
Ease of Install	4.3/5
Quality Consistency	4.4/5
Value	4.5/5
Overall Rating	4.4/5

Phillips Hardware Black – 1″

This is classic 1-inch Phillips skateboard hardware. It is the go-to size for most street and park decks without risers. The black finish keeps it low key on top of the deck. The Phillips head is easy to find tools for.

If you ride standard setups, 1-inch Phillips is simple and effective. It gives enough thread engagement without protruding past the nuts too much. It is fast to install and simple to replace. Keep a spare set in your bag.

Pros:

• Classic 1-inch length for standard decks
• Phillips head is easy to work with
• Clean black finish
• Lightweight and simple
• Good for daily skating and quick swaps

Cons:

• Phillips heads can strip if overtightened
• Not ideal for risers or thick setups
• No included tool

What Amazon Buyers Are Saying

Buyers of standard 1-inch Phillips sets note quick installation and a familiar feel. Some comments on similar listings mention avoiding over-tightening to protect the heads. Those using risers often advise stepping up to 1.25 inch or more. Check current reviews for notes on nut type and finish.

My Recommendation

Use this if your deck has no risers and you prefer Phillips. It is a reliable base choice. Overall rating: 4.3/5.

Category	Rating
Strength	4.2/5
Corrosion Resistance	4.0/5
Ease of Install	4.6/5
Compatibility	4.7/5
Value	4.4/5
Overall Rating	4.3/5

IMPORX 1″ Phillips Kit + Washers/Spacers

IMPORX includes more than just screws and nuts. You also get speed washers and spacers. This helps you refresh a full skate setup in one go. The 1-inch Phillips hardware fits most non-riser decks.

The extra washers keep your wheels spinning smooth. Spacers help align bearings and prevent over-tightening. It is a solid mini maintenance pack. If your board rattles, this kit can quiet it down fast.

Pros:

• Includes washers and spacers
• 1-inch Phillips is a common fit
• Good for quick full refresh
• Budget-friendly way to fix noise
• Simple to install with basic tools

Cons:

• Not ideal for risers
• Hardware material unspecified
• No T-tool included

What Amazon Buyers Are Saying

Kits with spacers and washers typically earn praise for value. Buyers like having extras on hand. Some users mention checking spacer width for wheel brands. Read current reviews for details on fit with your bearings.

My Recommendation

Get this if you want one order to stop squeaks and refresh hardware. It is a convenient add-to-cart. Overall rating: 4.3/5.

Category	Rating
Strength	4.1/5
Completeness of Kit	4.7/5
Ease of Install	4.5/5
Compatibility	4.4/5
Value	4.6/5
Overall Rating	4.3/5

C&Xanadu Bolts + All-in-One T Tool

This bundle gives you bolts plus a T-tool and an L-type screwdriver. If you are new to skating, this is handy. You can build and adjust your board right away. The gold color adds some flair.

I like tool bundles for travel or first setups. The T-tool tightens trucks, wheels, and hardware in one go. The included wrench matches the bolt heads. If you want an easy starter kit, this helps a lot.

Pros:

• Includes a T-tool and L-type wrench
• Great for first-time setup
• Gold bolts add style cues
• All-in-one convenience
• Useful for quick roadside fixes

Cons:

• Head/drive type not clearly stated
• Hardware material unspecified
• Tool quality may vary with bundles

What Amazon Buyers Are Saying

Buyers of bolt-and-tool bundles tend to highlight convenience. Many like having everything in one pack. Some mention tool fit and durability as a watch item. Read recent comments to confirm the T-tool quality.

My Recommendation

Good pick if you do not own a skate tool. It helps you set up and tune on day one. Overall rating: 4.2/5.

Category	Rating
Strength	4.0/5
Tool Quality	4.2/5
Ease of Install	4.7/5
Completeness	4.8/5
Value	4.5/5
Overall Rating	4.2/5

PATIKIL 1″ Blue Carbon Steel Set

This 1-inch PATIKIL kit comes in a blue finish. It is an easy way to mark your nose or tail. Or match team colors. The set includes bolts and nuts for a complete mount.

Carbon steel helps resist bending. Keep in mind the 1-inch length fits most street setups without risers. Color hardware also helps you align trucks and deck holes during install. It is simple and useful.

Pros:

• Color finish aids nose/tail marking
• 1-inch length fits standard decks
• Carbon steel construction
• Complete set with nuts
• Great for style builds

Cons:

• Head/drive type not listed
• Painted finishes can wear with time
• No included tool

What Amazon Buyers Are Saying

Color hardware buyers often praise the look and easy orientation. Some mention checking paint durability at the head. Read current reviews for notes on finish and nut style. Verify size before purchase.

My Recommendation

Pick this if you want simple 1-inch screws with color pop. It is an easy upgrade for visibility and style. Overall rating: 4.2/5.

Category	Rating
Strength	4.2/5
Finish Durability	3.9/5
Ease of Install	4.4/5
Compatibility	4.6/5
Value	4.3/5
Overall Rating	4.2/5

PATIKIL 1″ Green Carbon Steel Set

This is a green version of PATIKIL’s 1-inch set. It is built from carbon steel and includes nuts. Green adds a strong visual cue on the deck. It also looks great with natural wood stains.

Use colored bolts to set stance quickly. It helps in low light and during contests. The 1-inch size stays flush on the deck with standard thickness. It is a clean and simple kit.

Pros:

• Vivid green for fast stance checks
• 1-inch length is deck-friendly
• Carbon steel for durability
• Includes nuts
• Good style-to-price ratio

Cons:

• Head/drive not specified
• Color may chip with heavy use
• Not for risers

What Amazon Buyers Are Saying

Color sets often get positive notes for visibility and style. Some buyers mention monitoring paint wear around the countersink. Check recent reviews for details on nut type and package count.

My Recommendation

Choose this if you like bold color and a standard length. It is a quick style upgrade. Overall rating: 4.2/5.

Category	Rating
Strength	4.2/5
Finish Durability	3.9/5
Ease of Install	4.4/5
Compatibility	4.6/5
Value	4.3/5
Overall Rating	4.2/5

9PCS Color Hardware + Hex Key (Allen)

This set includes 9 pieces and a hex key. That usually means eight bolts plus a tool. The Allen head is less likely to cam out than Phillips. Dazzling colors add a unique look on top of the deck.

I like Allen for high-torque installs. It protects heads when you crank down on trucks. The included tool makes setup easy on the spot. If you want visible hardware and simple installs, this is a good match.

Pros:

• Allen head resists stripping
• Includes a matching hex key
• Bold color options
• Great for quick assembly
• Beginner friendly

Cons:

• Exact size must be chosen (varies by listing)
• Color finishes can scuff with use
• Material not specified

What Amazon Buyers Are Saying

Allen hardware sets often get praise for fewer stripped heads. Shoppers like having a hex key in the pack. Some mention checking the tool size against the bolts for a snug fit. Review the updated Q&A for sizing choices.

My Recommendation

Great pick if you prefer Allen hardware and want color with a tool included. It is simple and effective. Overall rating: 4.3/5.

Category	Rating
Strength	4.2/5
Head Durability	4.5/5
Ease of Install	4.6/5
Completeness	4.4/5
Value	4.4/5
Overall Rating	4.3/5

Fireball Dragon Stainless (Allen) 1.0″

This Fireball Dragon set uses stainless steel and a flat countersunk Allen head. Stainless fights rust. That makes it ideal for wet streets, coastal air, or rainy commutes. The Allen drive helps avoid stripping.

At 1.0 inch, it fits standard setups without risers. If you ride in humid climates, this pays off fast. Your bolts will look clean longer. It is a premium choice among the best screws for skateboard durability.

Pros:

• Stainless steel for strong rust resistance
• Allen head for secure torque
• Flat countersunk for a flush deck top
• Ideal for coastal or wet climates
• Premium look and feel

Cons:

• Higher price than basic steel
• 1-inch not ideal for risers
• No included tool

What Amazon Buyers Are Saying

Stainless hardware buyers often praise the long-lasting finish. Many like the Allen drive for reliability. A few mention cost as the trade-off for corrosion resistance. See the latest reviews for notes on fit and nut type.

My Recommendation

This is my pick for wet or coastal areas. It lasts longer and stays clean. Strong buy if you want premium hardware. Overall rating: 4.6/5.

Category	Rating
Strength	4.5/5
Corrosion Resistance	4.9/5
Ease of Install	4.6/5
Finish Longevity	4.8/5
Value	4.4/5
Overall Rating	4.6/5

PATIKIL 1″ Purple Carbon Steel Set

This set adds a purple finish to a 1-inch carbon steel kit. It is great for themed boards. Or for clear grip tape where color pops through. It includes bolts and nuts for a full truck mount.

Color helps you keep track of stance and setup. The 1-inch size will sit flush on most standard decks. If you want both function and flair, this hits the mark. It is a fair price for the look.

Pros:

• Standout purple color
• 1-inch length for common decks
• Carbon steel build
• Complete set included
• Great match for creative builds

Cons:

• Head/drive not specified
• Color may wear at contact points
• No tool included

What Amazon Buyers Are Saying

Users who buy colored bolts often like the style and visibility. Some watch for paint scuffs over time. Look at the latest ratings for notes on nut type and exact count. Confirm sizing for your deck.

My Recommendation

Pick this if you want a unique top-deck look with reliable 1-inch length. It balances style and function. Overall rating: 4.2/5.

Category	Rating
Strength	4.2/5
Finish Durability	3.9/5
Ease of Install	4.4/5
Compatibility	4.6/5
Value	4.3/5
Overall Rating	4.2/5

How to Choose the Best Screws for Skateboard

The best screws for skateboard setups do three things. They hold tight. They resist damage. They match your deck and riser stack. Here is how to choose the right set for your ride.

1. Pick the Right Length for Your Setup

Length is the first choice. Most street and park decks without risers use 1-inch bolts. Add 1/8-inch risers and many riders move to 1.25-inch. Thick decks or longboards with 1/4-inch risers often use 1.5-inch or more. You want full nut engagement without lots of extra thread sticking out.

Quick guide: no risers = 1″. Small risers (1/8″) = 1.25″. Larger risers (1/4″) or drop-through longboards = 1.5″ or longer. Always check your deck thickness and risers before buying.

2. Choose Head/Drive Type: Phillips vs. Allen

Phillips is common and easy to find tools for. It works fine if you do not over-tighten. Allen (hex) gives better torque and is less likely to strip. It is my go-to for heavy riders or tight setups. If you adjust often, Allen holds up better over time.

Look for countersunk flat heads. They sit flush on top of the deck. That keeps your shoes safe and avoids snags on flip tricks.

3. Match Material and Nuts to Your Riding Conditions

Carbon steel is standard and cost-effective. For wet or coastal areas, stainless steel hardware is worth it. It fights rust and stays clean. For high impact or heavier riders, look for strength grades (like Grade 8.8) when listed.

Nuts matter too. Nylon insert lock nuts (nyloc) resist loosening. They stay tight through vibration. If the listing does not specify nut type, consider buying spare nyloc nuts. It is a small cost for a big upgrade.

Final Verdict: Which Should You Buy?

The Fireball Dragon Stainless (Allen) 1.0″ is the best overall pick if you want long life, clean looks, and fewer stripped heads. For risers or heavy setups, the PATIKIL 1-1/4″ Grade 8.8 kit is a strong second choice.

Use this guide to pick the best screws for skateboard stability and style. Choose the right length, drive type, and material, and your board will feel solid for months.

FAQs Of best screws for skateboard

What size skateboard screws should I use?

Most decks without risers use 1-inch screws. With 1/8-inch risers, 1.25-inch is common. Thick decks or 1/4-inch risers often need 1.5-inch.

Are Allen or Phillips skateboard screws better?

Allen heads strip less and allow more torque. Phillips is fine for standard use and easy to find tools for.

Do I need lock nuts on skateboard hardware?

Yes, nyloc lock nuts help prevent loosening from vibration. They are a cheap upgrade for safety.

Will stainless steel screws rust on a skateboard?

Stainless steel resists rust very well. It is a smart choice for wet, humid, or coastal conditions.

How many screws come in a skateboard hardware set?

Most sets include eight bolts and eight nuts. Some kits add a tool, washers, or spacers.

Can I reuse old skateboard screws?

Yes, if threads and heads are intact. Replace any that are bent, rusty, or stripped.

Do colored bolts fade or chip?

Color finishes can chip at the head with heavy use. Function remains fine, but looks may wear.

How tight should skateboard screws be?

Snug and secure. Tighten until the truck baseplate sits flush. Do not over-tighten and crush the deck.